184 replies to this topic

[Jurij]

Use current S1Tool version:  s1tool 28II2015.exe   3.13MB   4798 downloads

[tanoy2k]

Hi, thank you for the guide. Don't work yet form me, stuck in this step:

 

12/07/2015 17:18:51 Welcome to S1 tool.
12/07/2015 17:18:52 That is small and crippled subset of SETOOL2 service tool.
12/07/2015 17:18:58  
12/07/2015 17:18:58 SELECT FIRMWARE PACKAGES
12/07/2015 17:18:58 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
12/07/2015 17:19:01 CHECKING PACKAGES ...
12/07/2015 17:19:01  
12/07/2015 17:19:01 DETACH USB CABLE FROM PHONE
12/07/2015 17:19:01 REMOVE BATTERY FROM PHONE
12/07/2015 17:19:01 ATTACH TESTPOINT
12/07/2015 17:19:01 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
12/07/2015 17:19:01  
12/07/2015 17:19:26 will use Sahara protocol ... 
12/07/2015 17:19:26 REMOVE TESTPOINT NOW, THEN PRESS "READY"
12/07/2015 17:19:26  
12/07/2015 17:19:31 PROCESSING ...
12/07/2015 17:19:32 SERIAL NUMBER : C94A2502
12/07/2015 17:19:32 HARDWARE ID 00000000E1007B00 NOT SUPPORTED
12/07/2015 17:19:32 HARDWARE ID : 00000000E1007B00
12/07/2015 17:19:32 NOT SUPPORTED HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
12/07/2015 17:19:32 Elapsed:33 secs.

 

Any suggestions please? thank you

[Jurij]

Your phone is not supported, probably C6602 phone. Buy working phone with broken LCD and swap main board.

[edilson123]

S1 says is waiting for phone and nothing happens. Why?

[Jurij]

Drivers installed? Can you see in device manager new device?

[edilson123]

When i try turn on the phone, the red LED flashes 3 times, i try flash firmware with SONY Companion and FlashTool when i finhish the phone dont turn on.

Drivers installed? Can you see in device manager new device?

 

SOMC Flash Device

[Jurij]

Show flashing log. Try to connect charger and wait a few hours.

 

 

SOMC Flash Device

 

That is ok, boot not damaged.

[edilson123]

Show flashing log. Try to connect charger and wait a few hours.

 

 

That is ok, boot not damaged.

 

I tried to charge the phone but he becomes very hot. Maybe a problem in the battery? I will flashing firmware and copy the log.

[Jurij]

Try other charged battery. I think it's battery problem or main board damaged. Phone was water damaged maybe?

[Zmiter]

Hello, has brick C6603 is not included, is not defined. When you remove the battery is defined as "s1boot fastboot." Established Gordon's gate flash drivers. After testpoint defined as the "Zeus...". When you try your method of firmware we have the following picture.

Please tell me what I'm doing wrong? Thank you!

[Jurij]

Your phone is just not supported, and boot is damaged. Buy working Xperia Z with broken LCD and swap main board. No other solutions

[blacky199]

Sony C6603 boot repair failed need help 

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162000000000
17004000000000E1907100
180100CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:45 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
llbug: [\\?\USB#VID_05C6&PID_F006#5&1bf0ba15&0&14#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"
Elapsed:10 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
llbug: [\\?\USB#VID_05C6&PID_F006#5&1bf0ba15&0&14#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"
Elapsed:112 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162000000000
17004000000000E1907100
180100CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:8 secs.

i am able to coneect in semc flash device

but software give error phone not supported in this mode

 

any possible solution available? to recover

Edited by blacky199, 07 November 2015 - 09:55.

[Jurij]

Remove battery, use testpoint and S1 Emergency mode.

[blacky199]

if i connect mobile without battery and only  test point it only make hid-complaint device in human interface device list

 

if i connect mobile with battery and test point it make semc flash device but sitool with s1 emergency mode option give phone not support in this mode

[Jurij]

SEMC flash device = phone not in dload mode. Remove battery, follow steps from this tutorial and phone should enter edl mode when you connect testpoint and attach usb cable. When it's done, try to uninstall this hid device with driver and make sure that gordon's gate flash driver is installed.

[FrancisplaysMC]

Jurij, Can you share the C6603.rar on mediafire or 4shared? Bcoz whenever im at 50% i always have a 99% chance that it will fail to download. I tried like 10 times downloading today but i always get error when im near 50%. My antivirus is disabled and my firewall is disabled when downloading. Please i can't try it again any longer. I spammed my download 10 times but it still fails.

[canna8510]

dear jurij, i have a question, does your tutorial worked on bootloop devices too like mine?

[Jurij]

Yes

[Wilcur]

2016-05-14 07:32:55 Welcome S1 Tool [28.02.2015].
2016-05-14 07:32:55 That is small and crippled subset of SETOOL2 service tool.
2016-05-14 07:32:59  
2016-05-14 07:32:59 SELECT FIRMWARE PACKAGES
2016-05-14 07:32:59 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2016-05-14 07:33:02 CHECKING PACKAGES ...
2016-05-14 07:33:02  
2016-05-14 07:33:02 DETACH USB CABLE FROM PHONE
2016-05-14 07:33:02 REMOVE BATTERY FROM PHONE
2016-05-14 07:33:02 ATTACH TESTPOINT
2016-05-14 07:33:02 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2016-05-14 07:33:02  
2016-05-14 07:33:11 will use DLOAD protocol ...
2016-05-14 07:33:11 0808010600900000
2016-05-14 07:33:11 0D0F50424C5F446C6F6164564552322E30
2016-05-14 07:33:11 162001000100
2016-05-14 07:33:11 17004001000100E1907100
2016-05-14 07:33:11 PRODUCT DETECTED: "SONY APQ8064-3 ES1 OEM1 Fused"
2016-05-14 07:33:11 1801001EA8B0C1B209C88CBB3E220F0AC00F6E6520A273D516B40E7F2EAEB0E5B3DB8B
2016-05-14 07:33:11 PROCESSING ...
2016-05-14 07:33:13 REMOVE TESTPOINT NOW, THEN PRESS "READY"
2016-05-14 07:33:13  
2016-05-14 07:33:13 Emergency loader uploaded ...
2016-05-14 07:54:42 PROCEDURE STOPPED BY USER
2016-05-14 07:54:42 supported phone was not detected

2016-05-14 07:54:42 Elapsed:1302 secs.
 

And flash stoped. Zeus flash device in pc device manager. What's wrong ??

[Jurij]

You've stopped procedure. Why? What device shows up in device manager? Driver properly installed? Use usb 2.0, original sony cable and try again.