184 replies to this topic

[xperienciandroid]

pero usted dijo en el tutorial que el procedimiento se realiza con la bateria desconectada

but you said in the tutorial that the procedure is done with the battery disconnected

help me please!    

[Jurij]

Yes, if there is enough power from usb port.  Otherwise fully charged battery may be required. Maybe that's the problem? How did you killed your phone and what exactly you are trying to do?

[xperienciandroid]

My phone was broken but a part of the touch worked and since here in Venezuela it is very difficult to get spare parts and even more difficult to buy them, I decided to use it for a while while I was meeting to buy the touch screen, the phone suddenly began to hang up. screen and restart itself, I concluded that it was the software that was damaged and decided to repair it with xperia companion, it happens that after repairing it the phone was hung after it passed the two logos, sony xperia and android, when it was in the initializacion animation of the phone was restarted, try to flash it with flashtool and did not recognize the computer and now I am trying to unlock the boot manager and you can not either, hopefully have a solution, because otherwise I will be without a phone for a very long time          

[Jurij]

Your phone has damaged hardware, you can't fix it by software. You don't need to unlock bootloader. Just reflash phone with all firmware parts: 1. appsw, 2. fsp, 3. cdf. Battery must be fully charged to flash your phone.

[xperienciandroid]

Where do I get those files? but it is that what worries me is that the computer recognizes me the device as "zeus flash device" and the phone does not turn on just turn on the led in red and does nothing else

[Jurij]

Try search for them on the internet. Or use Xperia firmware downloader.

[xperienciandroid]

xperiafirm? 

I get the firmware only in ftf format
Can I use that?

[Jurij]

That is not true. You are getting a bunch of .sin files. Read s1tool tutorials and make proper .zip files.

[feherneoh]

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1907100
PRODUCT DETECTED: "SONY APQ8064-3 ES1 OEM1 Fused"
1801001EA8B0C1B209C88CBB3E220F0AC00F6E6520A273D516B40E7F2EAEB0E5B3DB8B
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"


Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "APQ8064_39"
LOADER AID: 0001
DEVICE ID: 00A7B3A4
FLASH ID: "0015/01000004"
LOADER VERSION: "APQ8064_39"


WRITING PACKAGES ...
MINOR ERROR [ Open_TA_failed, err: 001D ]
Elapsed:40 secs.

Brick was caused by software modifications, phone is in emergency mode without using testpoint, and if it's really TA what is damaged, I have a complete eMMC backup from before bricking it, so I can get a TA backup easily. Any suggestions on what I should try?

[Jurij]

Restore your backup?

[feherneoh]

I would if I could, but I cannot get s1tool to flash any SIN_FILE_SET

[Jurij]

Use direct emmc tool to write your backup.

[feherneoh]

Use direct emmc tool to write your backup.

So no other way? Great... Now I just need to find someone with equipment for that

[en.mahdi10]

Disable all firewalls, antiviruses, use good internet connection - that file is 100% ok. You must find testpoint by yourself, if phone is not detected as qhusb_dload device.

Hi i have a xperia z c6602 that is dead.only action my phone shows is the red led when charging.i used flash tool and .ftf files but my phone dont show any reaction.none of its keys work.lastnight i see this post about Test Point and tried it with S1tools....but it seems my phone is dead really!!!can anyone tell me what shall i do?my pc dont detects or recognizes my phone and seems my phone has not fastboot or flashmode
Thank you

Edited by en.mahdi10, 23 November 2018 - 03:31.

[Jurij]

It depends how did you bricked your phone. I can't give you any advice if i don't know history of that device.

[en.mahdi10]

It depends how did you bricked your phone. I can't give you any advice if i don't know history of that device.

Hi,my xperia z died because water

[Jurij]

That's what i'm talking about. You can't fix damaged hardware with software. Disassembly your phone, wash your main board in 95% alcohol or isopropanol for 12 hours, dry it properly in dry place for the next 12 hours and pray. If that will not help, buy new phone. Most likely you will have to replace lcd, i don't know how serious was water damage so i can't help you more. If water damage was serious, batery may need to be replaced too, but you will se after repair process will be completed.

[en.mahdi10]

That's what i'm talking about. You can't fix damaged hardware with software. Disassembly your phone, wash your main board in 95% alcohol or isopropanol for 12 hours, dry it properly in dry place for the next 12 hours and pray. If that will not help, buy new phone. Most likely you will have to replace lcd, i don't know how serious was water damage so i can't help you more. If water damage was serious, batery may need to be replaced too, but you will se after repair process will be completed.

Hi,ok,i want to say thank you for your time that give me and other.i think that is better i buy a new phone.however in my country(IRAN)phones are very expensive but i have not other idea.i have to buy a new phone.thank you dear

[Jurij]

Why? At least try to fix it. ;Just clean the main board with 95% alcohol / isopropanol, dry it and try to power on.

[en.mahdi10]

Why? At least try to fix it. ;Just clean the main board with 95% alcohol / isopropanol, dry it and try to power on.

I will try it and will say the result
Thanks Man