184 replies to this topic

[Jurij]

Maybe try to start repair procedure, connect testpoint to gnd, attach usb cable and when windows will detect Zeus Flash Device - remove it with driver, rescan for new devices and install new driver?

[Eric]

I am try to do that, i think it is time for me to get z3, lol

[Jurij]

Maybe try to remove metal shield and connect it exactly as shown on picture in the first post: http://sony.yt/topic...616/#entry42904 ? For other people it works, i have no idea why it does not work for you. Or take a picture how you are doing testpoint...

[Eric]

The device repeatly connect and disconnect while connect with usb and the device manager cant recognize it

Attached Files

•  2014-10-05-21-02-35.png   1.04MB   10 downloads
•  2014-10-05-21-02-54.png   1.7MB   2 downloads

[Jurij]

Well you are connecting it properly and i hope you keep it connected together until program will ask you to remove testpoint... Try a few more tricks:

 

1. Uninstall all usb flash drivers, reboot your PC and install only gordon's gate flash driver from the first post.

 

2. Insert usb cable to 2.0 port connected directly to main board (do not use usb hubs etc.).

 

3. Start repair procedure, add xperia z firmware, press testpoint ready, attach and hold connected testpoint to gnd and attach usb cable.

 

Also make sure that all programs from Sony (PC Companion etc.), all other flash tools are turned off (also in tray).

[Eric]

The device is till recognized as Zues flash Device , the setool message still the same, i think it is the hardware getting wrong ,

[Jurij]

I'm sorry i'm confused. On the screenshot you've posted i can see SOMC flash device. Now you are posting about ZEUS flash device. So which one is truth? Post full output from S1tool in code tags.

Update: I've found a different testpoint image, so try with this one:

 

 C66XX testpoint.jpg   148.31K   12 downloads

 

and post results

[Eric]

Sorry, i made a mistake. In the post #44? the device is recognized as Zeus device with above method connecting tp. with motherboard,
After trying the new method you posted in #47?the i got following result, only can be recognized as somc flash device.

Attached Files

•  2014-10-06-08-09-55.png   1.37MB   4 downloads
•  2014-10-06-08-09-34.png   999.03K   3 downloads

[Jurij]

You are doing testpoint wrong. Try different wire / paper clip.

[Eric]

U mean still use the second method you post ? It still recognize Zeus device, should i download a qhusb dload driver?

[Jurij]

No. You should perform testpoint procedure correctly. S1tool output log shows that you are doing it not properly. Try different wire / paper clip.

[Eric]

Still recognized as Zeus Device
Wt is wrong ? Does it the matter with hardware?
Wt is wrong with my z
Is it the problem of qhusb dload driver,how to get the driver
I cannt find in Gordens Gate files

Attached Files

•  2014-10-06-19-36-59.png   1.11MB   4 downloads

[Jurij]

The driver is fine, as you can see there is different S1tool output. Do you have trim area backup?

 

Yes - your phone can be fixed.

 

No - your phone is a brick.

 

And post full output log in code tags as a text - stop posting images please.

[Eric]

Wt is trim area backup ?
post full output log in code tags as a text ?u mean i type it down ?
I am sorry for that, i will try , thank you for your patient and forgive my poor english,

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1907100
PRODUCT DETECTED: "SONY APQ8064-3 ES1 OEM1 Fused"
1801001EA8B0C1B209C88CBB3E220F0AC00F6E6520A273D516B40E7F2EAEB0E5B3DB8B
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
Emergency loader uploaded ...
RUNNING S1_PRELOADER VER "APQ8064_39"
LOADER AID: 0001
DEVICE ID: 01CAD481
FLASH ID: "0015/01000004"
LOADER VERSION: "APQ8064_39"
WRITING PACKAGES ...
Processing package
C:\Users\YIP\Downloads\C6603\10_5_A_0_230.APP_SW_Yuga_GENERIC_1269_5309_S1_SW_LIVE_5CA3_PID1_0002_MMC.SIN_FILE_SET
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:41 secs.

[Jurij]

Ok, thanks. Press identify button and connect phone again, then post identify output

[Eric]

do i need to do testpoint when i identify my phone with setool

[Jurij]

Can you identify your phone in flash mode? If it's detected - no. In emergency mode - yes.

[Eric]

Welcome to S1 tool.

That is small and crippled subset of SETOOL2 service tool.

 

TO CONNECT NEXT PHONES

X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro

LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY

PRESS AND HOLD "BACK" BUTTON...

 

ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro

and Sony Xperia phone

PRESS AND HOLD "Volume Down" BUTTON...

 

PLEASE ATTACH TURNED OFF PHONE NOW

Waiting for phone ...

 

 

 

cann`t be identifed 

[Jurij]

Even with testpoint?

[Eric]

yes . 

wt can i do right now

The device repeatly connect and disconnect while connect with usb and the device manager cant recognize it.and the setool did too