186 replies to this topic

[iaxperia]

hi again jurij!! this time my friend have some error and i think his phone is soft bricked
he has flashed z3 experience by vwadan rom
he wanted to back to stock 4.2 rom
but when he conected phone to pc for flshing wit flashtool device manager say ^somc flash device^ not ^semc flash device^
phone star when power button is pressed but it shows sony logo and then off
if i conect it to pc or wall charger green light apear like flashmode then green light power off and pone shows soony logo and then power off again
disconecting battery flex it still appearing green light when conect to pc of wall charger
can you hrlp me?
i have tryed with flastool but it says flashing aborted cant load system.sin

Edited by iaxperia, 14 March 2017 - 23:15.

[Jurij]

If you are talking about Xperia SP, read first post in this thread, follow tutorial, flash your phone with all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

and post results If you can't connect your phone in flash mode, use EDL mode and testpoint.

[alifazli]

hi.what is this erorr?

Edited by alifazli, 15 May 2017 - 12:25.

[Jurij]

Your phone is not supported in this mode. What phone are you trying to service?

[mephisto]

Hi, I'm trying to fix my bricked Xperia SP. My PC (running windows 10) sees the device as "Qualcomm HS-USB QDLoader 9008 (COM5)" . But S1tool stuck at "wating for the phone" level. What can you say about that problem?

 

14.07.2017 13:29:03 Welcome S1 Tool [28.02.2015].

14.07.2017 13:29:03 That is small and crippled subset of SETOOL2 service tool.

14.07.2017 13:29:05 

14.07.2017 13:29:05 SELECT FIRMWARE PACKAGES

14.07.2017 13:29:05 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

14.07.2017 13:29:08 CHECKING PACKAGES ...

14.07.2017 13:29:08 

14.07.2017 13:29:08 DETACH USB CABLE FROM PHONE

14.07.2017 13:29:08 REMOVE BATTERY FROM PHONE

14.07.2017 13:29:08 ATTACH TESTPOINT

14.07.2017 13:29:08 PRESS "READY", THEN ATTACH USB CABLE TO PHONE

14.07.2017 13:29:08 

14.07.2017 13:35:38 PROCEDURE STOPPED BY USER

14.07.2017 13:35:38 Elapsed:392 secs.

[Jurij]

Make sure you are using current gordon's gate flash driver and use the latest s1tool in edl mode:  s1tool 19V2015.exe   3.52MB   2962 downloads

[CARLO12]

How about xperia s lt25i?

Do you have boot flash files for it?

Thanks in advance...

[Jurij]

LT25i is Xperia V, not Xperia S. You don't need boot files for both of them. Just flash proper firmware. Also if you have a question about other phone than Xperia SP, start a new thread in proper forum.

[arhamstrix]

So your initial problem is damaged partition system, not damaged boot. Mr the_laser made for you new version of S1Tool which allows to skip TA open attempt. Download and run this version: s1tool 28II2015.exe of s1tool and try to flash boot file in s1 emergency mode. Post output log here after flash.

How to get mbn file for msm8260a xperia tx Please help!

If you are talking about Xperia SP, read first post in this thread, follow tutorial, flash your phone with all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

and post results If you can't connect your phone in flash mode, use EDL mode and testpoint.

How to get APPSW FSP AND ELABEL FOR XPERIA TX?

[Jurij]

You can find them online or use xperia firmware downloader,

[J_zed_s]

Any output log? Well, are you sure that all Sony programs (PC Companion) and other tools are turned off (also in tray)?

Hi, I have a question before proceeding the great method you provided, my phone almost doesn't have much reaction to buttons ,lcd doesn't turn on,just red led while charging and only back OFF button makes 3 vibrates and then nothing. it doesn't even charge the battery (1.7 volt tested with multimeter) .
so this means my phone is hard bricked? or maybe damaged charging circuit?

[Jurij]

What's the reason your phone is not working anymore?

[J_zed_s]

What's the reason your phone is not working anymore?

I don't know for sure, maybe a faulty charger but it was a kind of sudden death. no impact or water damage .
does the boot control voltages?

What's the reason your phone is not working anymore?

I don't know for sure, maybe a faulty charger but it was a kind of sudden death. no impact or water damage .
does the boot control voltages?

[Jurij]

No. If phone was not flashed or software modified i assume it's hardware issue.

[J_zed_s]

No. If phone was not flashed or software modified i assume it's hardware issue.

Probably yes , I've connected device through this method to pc today, the phone appears as zeus flash in device manager.
after a few seconds when I was about to run s1tool, it disconnected by it self, is this common or its only my device?
(I should manual charge the battery to be able to connect again)
--->is the attachment below the test point for bootloader repair?
why appears as zeus and not " qhusb_dload device" in device manager?

Attached Files

•  post-1-0-81188600-1421655157.jpg   15.75K   2 downloads

Edited by J_zed_s, 19 September 2019 - 22:43.

[J_zed_s]

can anyone provide the test point????????

[Jurij]

It's in this post: https://sony.yt/topi...303/#entry43752. Phone should be detected even if battery is disconnected.

[J_zed_s]

It's in this post: https://sony.yt/topi...303/#entry43752. Phone should be detected even if battery is disconnected.

one problem solved= without battery phone doesn't disconnect.
it shows as zeus flash device in device manager which s1tool doesn't recognise it,with the lower pin connected it shows as semc flash
I never used s1tool, I've used flashtools for rom and kernel flashing to my old Sony Ericsson device years ago.
can't I use stock frimware to flash with flashtools?

[J_zed_s]

I was able to flash and update bootloader to version R118023 successfully with this method.
However it turned out my RAM ic is facing issues and is technically DeaD! cannot find replacement on the market, DAMN
#xperia_sp #ram #not_booting #red_led #no_screen

[Jurij]

Just buy working Xperia SP with broken LCD and swap the main board Or buy working main board.