186 replies to this topic

[Jurij]

Maybe phone has some hw problem? Flash it with the latest generic firmware and if that will not help - it must be hardware problem.

[joseva]

Good evening

 

them

First give thanks for help better understand this junk and then apologize for my English.

I you could explain this

 

a greeting

Attached Files

•  SP.png   61.34K   4 downloads

[robing]

Suggestion...

 

right click on program "S1 Tool.exe" and select "open as administrator" 

 

Good luck!

Edited by robing, 03 December 2015 - 02:56.

[Jurij]

And maybe there is not enough power from usb port. Before pressing "READY" button attach charged battery.

[joseva]

Good Morning

 

I tested with battery full, as administrator and nok.

Question?

 

The program and file must be in a specific location?

I use windows 7 32bit, a problem known?

 

Thank you

Good afternoon

 

After further testing, I realize that perhaps I've not charge run out of battery and therefore not connected as you told me earlier

Is there any way to force it to load ?.

 

A greeting

[Jurij]

I've told you what to do. Also make sure you are doing testpoint properly, use metal paperclip or testpoint wire.

[joseva]

Good evening

 

Thanks for everything, is already working.

 

The reason for the brick was for failure speaker is heard only through headphones, I was told I could be a software glitch and you could fix update. But it did not work

 

Greetings and thank you

[theomar]

hi , i have a problem with my sony xperia sp c5303 ,No luck with this method

hi , i have a problem with my sony xperia sp c5303 ,No luck with this method

phone is detected when i attached to comptur by usb 

please any solution 

Attached Files

•  Sans titre.jpg   119.61K   1 downloads

[Jurij]

Show me full log, not the image. I can't see what file are you trying to flash.

[theomar]

hello . thanks for your answer , i'm trying to flash this file . i thing that i have a fully dead boot brother , any solution

 

and this is the full log

 

 

Attached Files

•  Sans titre.JPG   47.35K   3 downloads
•  Sans titred.JPG   78.06K   2 downloads

Edited by faflak, 29 December 2015 - 08:52.

[Jurij]

It seems that is hardware problem, boot file can't be written.

[theomar]

any suggestion to solv this problem please

[diaz patiwara]

hi every body
special thanks to friend with good information. I have root my Sony xperia SP c5302 and no problem about root after that I try to make 2 partition in SD card my Sony going to loop the boot when device is booting i disconnect the battery to exit the SD card to back in 1 partition .my Sony not start again no on,no response to charger ,to computer ,and flash tools,completely dead.
I use your site information but I don't have blink in Led. when I try to connect to PC the PC hang it and no response.please help I repair my device. 
 

10/01/2016 22:22:10 Welcome to S1 tool.
10/01/2016 22:22:10 That is small and crippled subset of SETOOL2 service tool.
10/01/2016 22:22:14 
10/01/2016 22:24:06 SELECT FIRMWARE PACKAGES
10/01/2016 22:24:06 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
10/01/2016 22:24:08 CHECKING PACKAGES ...
10/01/2016 22:24:08 
10/01/2016 22:24:08 DETACH USB CABLE FROM PHONE
10/01/2016 22:24:08 REMOVE BATTERY FROM PHONE
10/01/2016 22:24:08 ATTACH TESTPOINT
10/01/2016 22:24:08 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
10/01/2016 22:24:08 
10/01/2016 22:24:13 will use DLOAD protocol ... 
10/01/2016 22:24:13 0808010600900000
10/01/2016 22:24:13 0D0F50424C5F446C6F6164564552322E30
10/01/2016 22:24:13 162001000100
10/01/2016 22:24:13 17004001000100E1108800
10/01/2016 22:24:13 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
10/01/2016 22:24:13 PHONE NOT SUPPORTED IN THIS MODE
10/01/2016 22:24:13 Elapsed:7 secs.

[Jurij]

You can't repair that phone using S1tool as we don't have emergency loader for C5302 model. Buy working phone with broken lcd and swap main board or sell your phone for replacement parts and buy a new one.

[Mohammed]

 My phone is totaly dead after flash not complited and now the problem is Qualcomm HS-USB QDload 9008 

I need this 3 files for Sony Xperia SP device.

1. MPRG8960T.hex
2. 8960T_msimage.mbn
3. rawprogram0.xml
4. patch0.xml

[Jurij]

Read first post in this thread and follow it step by step.

[Vish]

Hi i am trying to unbrick my sony xperia c5303 so used the above recommended method so as i was trying s1tool doesn't detect  the phone either it shows 

llbug: [\\?\USB#VID_0FCE&PID_D17B#5&ecb7860&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"

Elapsed:119 secs.
So i think my test point connection is not correct 

Please Login or Register to see this Hidden Content

 

Attached Files

•  IMG_20160822_140415_HDR.jpg   335.66K   2 downloads

Edited by Vish, 22 August 2016 - 15:08.

[Jurij]

Here is testpoint location:

 

 

 

 

Remove battery, connect it to gnd (for example sim card holder) using metal paperclip and attach usb cable.

[Vish]

thanks..  ok done the same nothing occurs when connecting that test point to grnd ..also tried with other points s1 tool doesn't detect the phone but still system detects as "QHSUSB_DLOAD" otherwise no response

thinking there no option other than replacing the board
 

[AllahAkbar]

????????? ???? ????? ???????? ??? ???? ?? ???????????? ?????, ? ?????? ???? ?? ?????????? ?? ??? ??????? ?? ????? ??????????, ????? ??????? ???? ???????? ??????? ???????? 2 ???????? ?? ????? ???????????????.

? ????????? ????????? recovery (CWM) ?? ?? ???? ??????. ???????? ?????????? ?? ?????????