186 replies to this topic

[iaxperia]

18/10/2016 01:28:06 p.m. Welcome to S1 tool.
18/10/2016 01:28:06 p.m. That is small and crippled subset of SETOOL2 service tool.
18/10/2016 01:28:28 p.m.  
18/10/2016 01:28:28 p.m. SELECT FIRMWARE PACKAGES
18/10/2016 01:28:28 p.m. YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
18/10/2016 01:28:29 p.m. CHECKING PACKAGES ...
18/10/2016 01:28:29 p.m.  
18/10/2016 01:28:29 p.m. DETACH USB CABLE FROM PHONE
18/10/2016 01:28:29 p.m. REMOVE BATTERY FROM PHONE
18/10/2016 01:28:29 p.m. ATTACH TESTPOINT
18/10/2016 01:28:29 p.m. PRESS "READY", THEN ATTACH USB CABLE TO PHONE
18/10/2016 01:28:29 p.m.  
18/10/2016 01:28:37 p.m. will use DLOAD protocol ...
18/10/2016 01:28:37 p.m. 0808010600900000
18/10/2016 01:28:37 p.m. 0D0F50424C5F446C6F6164564552322E30
18/10/2016 01:28:37 p.m. 162001000100
18/10/2016 01:28:37 p.m. 17004001000100E1507E00
18/10/2016 01:28:37 p.m. PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
18/10/2016 01:28:37 p.m. 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
18/10/2016 01:28:37 p.m. PROCESSING ...
18/10/2016 01:28:39 p.m. REMOVE TESTPOINT NOW, THEN PRESS "READY"
18/10/2016 01:28:39 p.m.  
18/10/2016 01:28:43 p.m. Emergency loader uploaded ...
18/10/2016 01:28:45 p.m.  
18/10/2016 01:28:45 p.m. RUNNING S1_PRELOADER VER "R5G008"
18/10/2016 01:28:45 p.m. LOADER AID: 0001
18/10/2016 01:28:45 p.m. DEVICE ID: 506FDA03
18/10/2016 01:28:45 p.m. FLASH ID: "0015/00000000"
18/10/2016 01:28:45 p.m. LOADER VERSION: "R5G008"
18/10/2016 01:28:45 p.m.  
18/10/2016 01:28:45 p.m. WRITING PACKAGES ...
18/10/2016 01:28:45 p.m. Elapsed:17 secs.

 and no more.... is ded my phone? :.L :.(

[Jurij]

Check skip TA errors option and try again. What are you trying to flash?

[iaxperia]

Hi i flashed unoficial cm12 on my c5303 but the rom has a bug. no sim card detection
I flashed a zip. To try fix no sim card detection...cant remenber where i did download it
The zip's name sim_detection_fix.zip or something like that
Well after that Phone is dead! I was so stupid to Flash without know about flashing methods :c :/
Phone is detected fine when i conect it to pc also s1tool recognise it
Sorry for my bad english

[iaxperia]

10/11/2016 02:00:04 p.m. Welcome S1 Tool [28.02.2015].
10/11/2016 02:00:04 p.m. That is small and crippled subset of SETOOL2 service tool.
10/11/2016 02:00:08 p.m.  
10/11/2016 02:00:08 p.m. SELECT FIRMWARE PACKAGES
10/11/2016 02:00:08 p.m. YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
10/11/2016 02:00:11 p.m. CHECKING PACKAGES ...
10/11/2016 02:00:11 p.m.  
10/11/2016 02:00:11 p.m. DETACH USB CABLE FROM PHONE
10/11/2016 02:00:11 p.m. REMOVE BATTERY FROM PHONE
10/11/2016 02:00:11 p.m. ATTACH TESTPOINT
10/11/2016 02:00:11 p.m. PRESS "READY", THEN ATTACH USB CABLE TO PHONE
10/11/2016 02:00:11 p.m.  
10/11/2016 02:00:23 p.m. will use DLOAD protocol ...
10/11/2016 02:00:23 p.m. 0808010600900000
10/11/2016 02:00:23 p.m. 0D0F50424C5F446C6F6164564552322E30
10/11/2016 02:00:23 p.m. 162001000100
10/11/2016 02:00:23 p.m. 17004001000100E1507E00
10/11/2016 02:00:23 p.m. PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
10/11/2016 02:00:23 p.m. 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
10/11/2016 02:00:23 p.m. PROCESSING ...
10/11/2016 02:00:27 p.m. REMOVE TESTPOINT NOW, THEN PRESS "READY"
10/11/2016 02:00:27 p.m.  
10/11/2016 02:00:29 p.m. Emergency loader uploaded ...
10/11/2016 02:00:31 p.m.  
10/11/2016 02:00:31 p.m. RUNNING S1_PRELOADER VER "R5G008"
10/11/2016 02:00:31 p.m. LOADER AID: 0001
10/11/2016 02:00:31 p.m. DEVICE ID: 506FDA03
10/11/2016 02:00:31 p.m. FLASH ID: "0015/00000000"
10/11/2016 02:00:31 p.m. LOADER VERSION: "R5G008"
10/11/2016 02:00:31 p.m.  
10/11/2016 02:00:31 p.m. WRITING PACKAGES ...
10/11/2016 02:00:31 p.m. Processing package
10/11/2016 02:00:31 p.m. C:\Documents and Settings\Administrador\Mis documentos\APPSW.sin_file_set
10/11/2016 02:00:31 p.m.  
10/11/2016 02:00:31 p.m. Processing ACPU files
10/11/2016 02:00:31 p.m. PROCESSING: apps_log.sin
10/11/2016 02:00:32 p.m. FATAL ERROR [ 0x0506:_sin_header_verification, err: 000A ]
10/11/2016 02:00:32 p.m. error while uploading final HDR block
10/11/2016 02:00:32 p.m. Break.
10/11/2016 02:00:32 p.m. FINISHED
10/11/2016 02:00:32 p.m. Elapsed:24 secs.

Edited by faflak, 13 November 2016 - 11:18.

[Tebex]

So, I have the same problem as above:

 

LOG:

2016-12-14 22:05:37 Welcome S1 Tool [28.02.2015].
2016-12-14 22:05:37 That is small and crippled subset of SETOOL2 service tool.
2016-12-14 22:05:45  
2016-12-14 22:05:45 SELECT FIRMWARE PACKAGES
2016-12-14 22:05:45 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2016-12-14 22:05:46 CHECKING PACKAGES ...
2016-12-14 22:05:46  
2016-12-14 22:05:46 DETACH USB CABLE FROM PHONE
2016-12-14 22:05:46 REMOVE BATTERY FROM PHONE
2016-12-14 22:05:46 ATTACH TESTPOINT
2016-12-14 22:05:46 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2016-12-14 22:05:46  
2016-12-14 22:06:07 will use DLOAD protocol ... 
2016-12-14 22:06:07 0808010600900000
2016-12-14 22:06:07 0D0F50424C5F446C6F6164564552322E30
2016-12-14 22:06:07 162001000100
2016-12-14 22:06:07 17004001000100E1507E00
2016-12-14 22:06:07 PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
2016-12-14 22:06:07 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
2016-12-14 22:06:07 PROCESSING ...
2016-12-14 22:06:10 REMOVE TESTPOINT NOW, THEN PRESS "READY"
2016-12-14 22:06:10  
2016-12-14 22:06:14 Emergency loader uploaded ...
2016-12-14 22:06:15  
2016-12-14 22:06:15 RUNNING S1_PRELOADER VER "R5G008"
2016-12-14 22:06:15 LOADER AID: 0001
2016-12-14 22:06:16 DEVICE ID: F67DAE05
2016-12-14 22:06:16 FLASH ID: "00FE/004E003F"
2016-12-14 22:06:16 LOADER VERSION: "R5G008"
2016-12-14 22:06:16  
2016-12-14 22:06:16 WRITING PACKAGES ...
2016-12-14 22:06:16 Processing package
2016-12-14 22:06:16 C:\Documents and Settings\Pan Szef\Pulpit\genuinespboot\S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET
2016-12-14 22:06:16  
2016-12-14 22:06:16 Processing ACPU files
2016-12-14 22:06:16 PROCESSING: boot.sin
2016-12-14 22:06:16 FATAL ERROR [ 0x0508:_sin_header_verification, err: 000A ]
2016-12-14 22:06:16 error while uploading final HDR block
2016-12-14 22:06:16 Break.
2016-12-14 22:06:16 FINISHED
2016-12-14 22:06:16 Elapsed:31 secs.

My phone was bricked when i accidentally restored boot partition from other xperia sp(using
TWRP recovery backup). After that it did not boot again. And this method gives me this error. Any help would be appriciated.

 

 

EDIT: I have got a backup of whole boot partition in boot.emmc format, if i only could restore it i think my phone would be repaired.

Edited by Tebex, 14 December 2016 - 23:08.

[Jurij]

So try to do it with direct emmc tool.

[Tebex]

Thanks for reply! But i don't know which tool to use. If you have some ideas how to start it would be really nice

[Jurij]

Only really good service centre can help you. I suppose you have no idea how to desolder emmc using hot air soldering station, connect to direct emmc tool, flash it and solder emmc back to your phone. That must be done by professionals only.

[Tebex]

Yes, I thought it had to be done this way. But really Thanks anyway!!

[iaxperia]

What mind HDR BLOCK??

[Jurij]

Part of firmware cannot be written into phone.

[Sourav-21]

Sir, According to your instructions I first flash S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET file in S1 Emergency mode. After that, my Xperia SP is detected as SOMC Flash Device in device manager and also sony logo in showing when I connect the mobile with charger or PC. Flashtool, Sony Emma these tools also can detect my mobile. Then I flash the stock firmware using Androxyde's flashtool. But still my mobile is in flashmode and don't boot up. Sir, please help. What should I do?

[Jurij]

Flash all firmware parts (in order: 1. appsw, 2. fsp 3. elabel) using current S1Tool in EDL mode and show flashing log.

[Sourav-21]

When I try to flash APPSW in S1 Emergency mode the logs are-

Welcome S1 Tool [28.02.2015].
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
 
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
and Sony Xperia phone
PRESS AND HOLD "Volume Down" BUTTON...
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
UNEXPECTED COMMAND 01000000
Elapsed:9 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
UNEXPECTED COMMAND 01000000
Elapsed:16 secs.

Also, you are saying that in APPSW there is a UPDATE.xml. But I don't find any UPDATE.xml in firmware package.

If I boot in flash mode logs are-

RUNNING S1_BOOT VER "R11B023"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:41 secs.

Edited by Sourav-21, 23 December 2016 - 05:19.

[Jurij]

Use current S1tool version:  s1tool 19V2015.exe   3.52MB   2928 downloads and show flashing log.

[Sourav-21]

Welcome S1 Tool [19.05.2015].
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
UNEXPECTED COMMAND 01000000
Elapsed:20 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
UNEXPECTED COMMAND 01000000
Elapsed:13 secs.

EDL mode

S1 flash mode logs

PLEASE ATTACH TURNED OFF PHONE NOW
Waiting for phone ...
 
RUNNING S1_BOOT VER "R11B023"
LOADER AID: 0001
[ llcomm: 00010000,00080000 ]
DEVICE ID: 59663104
FLASH ID: "0003/000000FE"
LOADER VERSION: "R5G008"
 
WRITING PACKAGES ...
Processing package
C:\Users\soura\Desktop\APPSW.SIN_FILE_SET
 
Processing ACPU files
PROCESSING: apps_log.sin
PROCESSING: cache.sin
PROCESSING: fotakernel.sin
PROCESSING: kernel.sin
PROCESSING: partition-image.sin
ERROR [ failed_to_set_ta_config, err: 0076 ]
SIN file not accepted
Break.
ERROR [ S1_TA_Close,limited, err: 0010 ]
FINISHED
Elapsed:31 secs.

[Jurij]

Your trim area is damaged. If you do not have backup from working state - your phone is a brick / spare parts source. Buy new phone or working Xperia SP with broken lcd and swap main board.

[Sourav-21]

Thanks, Mobile switched on and running fine.

 

But after recovered from hard brick I face a new problem. There is no fastboot mode, only flash mode. If I press the volume up button and connect with USB, no blue light is showing. It only shows red light and connected as charging mode. The flash mode (volume down) working fine as expected. 

[Sourav-21]

Also, I find in the service menu that-

Rooting status:

Bootloader unlock allowed: No

 

Please suggest me how to solve this problem.

[Jurij]

You can't solve this problem, only authorized Sony service tool - emma - can customize your phone and change bootloader unlock status.