101 replies to this topic

[leslie05]

@faflak

 

I don't know which files you mean.

 

I downloaded and unzipped the file mentioned by Jurij in point 4 "R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.rar".

 

Thouhgt that was enough.

 

"5. In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia V LT25 boot firmware .sin_file_set file"  Is'nt that the same file?

[faflak]

Yes, this is files for xperia Lt25 do you hawe xperia lt25?

correct:                                                                                 Your:

RUNNING S1_PRELOADER VER "R5G008"          RUNNING S1_PRELOADER VER "R5F001
LOADER AID: 0001                                                 LOADER AID: 0001
DEVICE ID: 2078EB03                                            DEVICE ID: 6D090E09
FLASH ID: "00FE/004E003F"                                 FLASH ID: "0015/00000000" 
LOADER VERSION: "R5G008"                               LOADER VERSION: "R5F001

I'm no expert but such differences noticed, maybe Jurij help you

[leslie05]

Yes, mine is xperia v lt25i.

I think there is no difference between lt25 and lt25i.

 

I've installed cyanogenmod carbon 5.1.1

 

Maybe that's why there's the differences between correct and mine.

 

If it is so what can I do?

[Jurij]

It's the same phone. Run current S1tool as administrator and unpack xperia v boot file from rar archive then flash it and fully reflash phone.

[leslie05]

@Jurij

thank you for your help but

i'm so sorry, i tried it now about a 100 times and it's allways the same result.

Tool says: "Writing packages..." but nothing happens.

Next step: "Elapsed:35 secs."

 

It doesn't matter if i attach testpoint or not, even if i keep it attatched, it's every time the same.

I tried different points on mainboard, didn't help.

 

Device manager shows the phone now as "Zeus Flash Device".

 

Is there anything else i can do, except recycling?

 

 

PS: Maybe it's important: i tried to flash another baseband and then it bricked.

Edited by leslie05, 01 December 2015 - 09:46.

[Jurij]

Try on different pc, different operating system, different usb port (use usb 2.0) etc. Make sure that s1tool is running with administrative privilages and that boot firmware is unpacked from rar archive.

[leslie05]

Thank you for that hint.

 

I just tried with marked "SKIP TA OPEN" button and got this:

01.12.2015 13:05:05 WRITING PACKAGES ...
01.12.2015 13:05:06 Processing package
01.12.2015 13:05:06 C:\! UNBRICK LT25i\R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.SIN_FILE_SET
01.12.2015 13:05:06  
01.12.2015 13:05:06 Processing ACPU files
01.12.2015 13:05:06 PROCESSING: R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.SIN
01.12.2015 13:05:06 FATAL ERROR [ 0x0508:_sin_header_verification, err: 000A ]
01.12.2015 13:05:06 error while uploading final HDR block
01.12.2015 13:05:06 Break.
01.12.2015 13:05:06 FINISHED
01.12.2015 13:05:06 Elapsed:34 secs.

Maybe it's a hint for you before i try your last advice.

[albertogarcia1201]

una pregunta, el test point es solo colocar un cable entre el punto testpoint y gnd? 

[faflak]

@ albertogarcia1201 connect test point + gnd 

[azupardo]

9/24/2016 10:58:09 AM Welcome S1 Tool [28.02.2015].
9/24/2016 10:58:09 AM That is small and crippled subset of SETOOL2 service tool.
9/24/2016 10:58:44 AM  
9/24/2016 10:58:44 AM SELECT FIRMWARE PACKAGES
9/24/2016 10:58:44 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
9/24/2016 10:58:47 AM CHECKING PACKAGES ...
9/24/2016 10:58:47 AM  
9/24/2016 10:58:47 AM DETACH USB CABLE FROM PHONE
9/24/2016 10:58:47 AM REMOVE BATTERY FROM PHONE
9/24/2016 10:58:47 AM ATTACH TESTPOINT
9/24/2016 10:58:47 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
9/24/2016 10:58:47 AM  
9/24/2016 10:59:07 AM will use DLOAD protocol ... 
9/24/2016 10:59:07 AM 0808010600900000
9/24/2016 10:59:07 AM 0D0F50424C5F446C6F6164564552322E30
9/24/2016 10:59:07 AM 162001000100
9/24/2016 10:59:07 AM 17004001000100E1106B00
9/24/2016 10:59:07 AM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
9/24/2016 10:59:07 AM PHONE NOT SUPPORTED IN THIS MODE
9/24/2016 10:59:07 AM Elapsed:23 secs.

 

Please help. I got bricked xperia sol21. Phone not support sol21 and V, VL is same? 

Please help me. 

Edited by faflak, 24 September 2016 - 21:07.

[Jurij]

You can't fix Xperia SOL21 using S1Tool as S1Tool does not have emergency loader for Xperia SOL21. Buy working Xperia SOL21 with broken lcd and swap main board.

[windstoper]

Powitanie Jurij,

 

 

Can you help me to create *.sin_file_set from my ta.img?

 

I got brick after formating internal sd (sdcard0) when I try install CM13.

 

 

Góry dzięki/

Attached Files

•  TA-backup-20161112.165426.zip   82.3K   39 downloads

[Jurij]

Sure i can. But what for? You've damaged partitions on your phone, flashing Trim Area backup will not help.

[riki03]

Hallo Jurij,

 

I got all the symptoms for a bricked phone on my device.

So in the end I found your solution here and tried it.

 

The problem is that it works up to the point "Writing packages..."

But there are no packages written.

Next step is "Elapsed:35 secs."

 

That's all.

 

Log file says:

30.11.2015 15:47:36 Welcome S1 Tool [28.02.2015].
30.11.2015 15:47:36 That is small and crippled subset of SETOOL2 service tool.
30.11.2015 15:47:40  
30.11.2015 15:47:40 SELECT FIRMWARE PACKAGES
30.11.2015 15:47:41 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
30.11.2015 15:47:45 CHECKING PACKAGES ...
30.11.2015 15:47:45  
30.11.2015 15:47:45 DETACH USB CABLE FROM PHONE
30.11.2015 15:47:45 REMOVE BATTERY FROM PHONE
30.11.2015 15:47:45 ATTACH TESTPOINT
30.11.2015 15:47:45 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
30.11.2015 15:47:45  
30.11.2015 15:48:05 will use DLOAD protocol ...
30.11.2015 15:48:05 0808010600900000
30.11.2015 15:48:05 0D0F50424C5F446C6F6164564552322E30
30.11.2015 15:48:05 162001000100
30.11.2015 15:48:05 17004001000100E1506B00
30.11.2015 15:48:05 PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
30.11.2015 15:48:05 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
30.11.2015 15:48:05 PROCESSING ...
30.11.2015 15:48:09 REMOVE TESTPOINT NOW, THEN PRESS "READY"
30.11.2015 15:48:09  
30.11.2015 15:48:13 Emergency loader uploaded ...
30.11.2015 15:48:13  
30.11.2015 15:48:13 RUNNING S1_PRELOADER VER "R5F001"
30.11.2015 15:48:13 LOADER AID: 0001
30.11.2015 15:48:16 DEVICE ID: 6D090E09
30.11.2015 15:48:16 FLASH ID: "0015/00000000"
30.11.2015 15:48:16 LOADER VERSION: "R5F001"
30.11.2015 15:48:16  
30.11.2015 15:48:16 WRITING PACKAGES ...
30.11.2015 15:48:16 Elapsed:35 secs.

I would appreciate any hint that helps further on.

 

Sorry for my english is not so good

 

 

Thank you.

 

leslie05

Hello expert/s.

I have the same problem! Please help me because I feel to be so near at solutions, I don't like to recycle a phone like this.

 

Before the phone had recognize as DLOAD, now is Zeus Flash device.

 

I use win 10 and i tried with admin option or to change usb but it comes at the same block step.

Any more tricks I can do more?

Do you know what could means this issue?

Is it a phone problem or a pc difficulty?

 

I also tried with win 7 but it's worst becuase it doesn't start the process when i attach the phone.

 

Thank you in advance.

 

Regards

[Jurij]

Post log with skip ta open errors checked.

[riki03]

Wow..so fast. Thanks to support me.
But actually I didn't understand which logs you need.
My logs from s1tool is the same as i quote in the post.
Where i can find the ta open errors?

Post log with skip ta open errors checked.

Up

[Jurij]

 EDL.jpg   72.65K   15 downloads

[riki03]

EDL.jpg

Error sin_header_verification, err:000A
Hdr block not accepted
Break
Error(s1_ta_close,limited,err:0010
Finished

[Jurij]

Ok. I don't know how did you killed your phone and what you tried to flash, but this fragment says that trim area is damaged. Buy working phone with broken lcd and swap main board then.

[riki03]

Ok. I don't know how did you killed your phone and what you tried to flash, but this fragment says that trim area is damaged. Buy working phone with broken lcd and swap main board then.

I flashed two bootloader together or something strange thing like that.

Now i'm tring to follow these istruction..

Please Login or Register to see this Hidden Content

And TA conversion

Please Login or Register to see this Hidden Content