69 replies to this topic

[Jurij]

Hello,

Today i will show you how to unbrick your Sony Xperia ZR C5502 / C5503 and update boot. Sony Xperia ZR smartphone can be bricked because of damaged boot.

If after flash your phone is dead and you have warranty - send your phone to Sony - you will get new phone.

If after flash your phone is dead and you do not have warranty, this tutorial is for you. Remember, during this process you can damage your phone, everything you are doing on your own risk. For 99% your phone will not be 100% functional, for example it will not be waterproof anymore if you will disassemble or reassemble it improperly.


Bricked phone symptoms:

• can't power on after flash,
• no lcd or led reaction for power button,
• no lcd or led reaction for charger,
• no lcd or led reaction if phone is connected to PC,
• your PC can't detect your phone with vol-,
• phone does not vibrate when holding vol+ and power together.

Repair procedure:

1. Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:

qhusb_dload device

you are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone using this service manual: Sony Xperia ZR C5502 / C5503 Service Manuals , remove battery and connect testpoint to GND:

 

 C5503.jpg   593.81K   37 downloads

2. Download and install the latest Gordon's Gate Flash Driver from this post:  ggsetup-3.0.0.7.exe   3.58MB   14122 downloads

3. Download and run this s1tool:  s1tool 19V2015.exe   3.52MB   2956 downloads

4. Download proper APPSW firmware for your Sony Xperia ZR:

For C5502:  C5502.rar   16.2MB   1047 downloads

For C5503:  C5503.rar   16.2MB   691 downloads

5. In S1tool choose S1 EMERGENCY MODE, press Flash button, select correct APPSW .sin_file_set file (or you can select whole firmware if you have it in order APPSW, FSP, Elabel - but you can't use .ftf flashtool files),

6. Press Testpoint READY button:
 

 

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, perform all steps from point 1 (connect testpoint to GND and attach USB cable).

7. When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

8. After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader, update boot in your phone and flash selected firmware.

9. Now you have to flash (if not done yet) your phone with all firmware parts (APPSW, FSP, ELABEL) using S1 FLASH MODE, phone will be fixed. Also you can flash your phone using Sony Update Service, Sony PC Companion or any other flasher like current Flashtool.

10. Time to reassembly your phone using service manual: Sony Xperia ZR C5502 / C5503 Service Manuals


Credits: Big thanks to mr the_laser for creating this fantastic software and solution

Best regards,

Jurij
 

Tutorial worked out for Sony.yt forum - copying is prohibited.

[tecno_mobile]

Hello

 

i need the imeghs test point c5502

 

not found servic manual test point

 

             thank you

[Jurij]

They are not discovered yet, you may be the first one. Remove battery, connect each golden pin on your main board to gnd (metal shield for example or sim card reader) and attach usb cable. If your phone will be detected in device manager - you've found it. You can take a good photo of your main board, mark testpoint and attach it here for other users

[malikalhaji]

hi, can you please help me with tespoint for C5502?

[Jurij]

How? I've told you what to do. Take metal paperclip, perform testpoint procedure using each golden point on your main board,connect it with gnd and attach usb cable. I don't have Xperia ZR in my hands, so can't help you more.

[malikalhaji]

thanks

[malikalhaji]

i am still having some issue, whenever i connect my phone (without testpoint) my system finds a device (SEMC flash device). please what should i do?

[Jurij]

Maybe your phone is in EDL mode right now? If yes, just choose S1 EMERGENCY and try to flash Xperia ZR firmware in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL.

 

When program will ask you to attach testpoint, just attach usb cable and press TESTPOINT READY.

[malikalhaji]

i dont have the files u are talking about, the rar file u uploaded has only 1 file 10_4_B_0_569.APP_SW_Dogo_GENERIC_1271_0110_S1_SW_LIVE_5CA3_PID1_0002_MMC.SIN_FILE_SET and if i try that i get an error

[Jurij]

What error? Show flashing log. Full firmware you can download from internet, here is only appsw part required to update boot.

[malikalhaji]

i cant get the log but this is the screenshot of the error

Attached Files

•  s1 tool.JPG   61.87K   22 downloads

[Jurij]

Please use current S1tool version:  s1tool 28II2015.exe   3.13MB   4798 downloads

[malikalhaji]

please correct me if i am wrong, open S1 tools, select emergency mode, click on flash, choose the file and start?

Edited by malikalhaji, 08 May 2015 - 21:46.

[Jurij]

Yes, exactly as it's written in tutorial

[malikalhaji]

ststill getting the unexpected command error, i bricked my phone by flashing C6603 kernel instead of C5502, is that why i am having this issue?

[Jurij]

In flash mode you also get this error?

[malikalhaji]

this is the error i get

Attached Files

•  s1 tool flash.JPG   74.89K   22 downloads

[Jurij]

Boot in your phone is not damaged, so you can try to flash your phone with Flashtool or Sony PC Companion... There should be repair firmware option...

[malikalhaji]

i cant get flashtool to detect my phone, how else do i flash it?

[Jurij]

Please contact me on skype: gen.jurij i will try to help you using service box. I hope you have internet 2mbps or faster and windows vista or newer?