led7

Yup! Flashing s1boot only and appsw only and appsw, fsp, elabel tried it too.

I've read on previous post/comments, in same problem/error from sir seli1987

12/22/2014 01:01:12 ?.? Processing ACPU files
12/22/2014 01:01:12 ?.? PROCESSING: loader.sin
12/22/2014 01:01:12 ?.? FATAL ERROR [ 0x0508:_sin_header_verification, err: 000A ]
12/22/2014 01:01:12 ?.? error while uploading final HDR block
12/22/2014 01:01:12 ?.? Break.
12/22/2014 01:01:12 ?.? FATAL ERROR [ limited, err: 0010 ]
12/22/2014 01:01:12 ?.? FINISHED
12/22/2014 01:01:12 ?.? Elapsed:17 secs.

"FATAL ERROR [ limited, err: 0010 ]"

This one is not the same error i got, you said on your reply "No. Your phone is a brick. Nothing more to do." There's a chance my phone will be fix?

Using updated s1tool created by sir laser.

S1 EMERGENCY MODE, [?] SKIP TA OPEN

Removing Testpoint, and Pressing "READY"

3/2/2015 8:09:08 PM Welcome S1 Tool [28.02.2015].
3/2/2015 8:09:08 PM That is small and crippled subset of SETOOL2 service tool.
3/2/2015 8:09:20 PM  
3/2/2015 8:09:20 PM SELECT FIRMWARE PACKAGES
3/2/2015 8:09:20 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
3/2/2015 8:09:25 PM CHECKING PACKAGES ...
3/2/2015 8:09:25 PM  
3/2/2015 8:09:25 PM DETACH USB CABLE FROM PHONE
3/2/2015 8:09:25 PM REMOVE BATTERY FROM PHONE
3/2/2015 8:09:25 PM ATTACH TESTPOINT
3/2/2015 8:09:25 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
3/2/2015 8:09:25 PM  
3/2/2015 8:09:32 PM will use DLOAD protocol ... 
3/2/2015 8:09:32 PM 0808010600900000
3/2/2015 8:09:32 PM 0D0F50424C5F446C6F6164564552322E30
3/2/2015 8:09:32 PM 162001000100
3/2/2015 8:09:32 PM 17004001000100E1507E00
3/2/2015 8:09:32 PM PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
3/2/2015 8:09:32 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
3/2/2015 8:09:32 PM PROCESSING ...
3/2/2015 8:09:33 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"
3/2/2015 8:09:33 PM  
3/2/2015 8:09:39 PM llbug: write error: "The device does not recognize the command"
3/2/2015 8:09:39 PM llbug: blk write fail.fatal
3/2/2015 8:09:39 PM qcSendPacket: can't send packet.
3/2/2015 8:09:39 PM Elapsed:18 secs.
3/2/2015 8:09:49 PM  

3/2/2015 8:09:49 PM SELECT FIRMWARE PACKAGES
3/2/2015 8:09:49 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
3/2/2015 8:09:51 PM CHECKING PACKAGES ...
3/2/2015 8:09:51 PM  
3/2/2015 8:09:51 PM DETACH USB CABLE FROM PHONE
3/2/2015 8:09:51 PM REMOVE BATTERY FROM PHONE
3/2/2015 8:09:51 PM ATTACH TESTPOINT
3/2/2015 8:09:51 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
3/2/2015 8:09:51 PM  
3/2/2015 8:09:59 PM will use DLOAD protocol ... 
3/2/2015 8:09:59 PM 0808010600900000
3/2/2015 8:09:59 PM 0D0F50424C5F446C6F6164564552322E30
3/2/2015 8:09:59 PM 162001000100
3/2/2015 8:09:59 PM 17004001000100E1507E00
3/2/2015 8:09:59 PM PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
3/2/2015 8:09:59 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
3/2/2015 8:09:59 PM PROCESSING ...
3/2/2015 8:10:01 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"
3/2/2015 8:10:01 PM  
3/2/2015 8:10:02 PM Emergency loader uploaded ...
3/2/2015 8:10:09 PM  
3/2/2015 8:10:09 PM RUNNING S1_PRELOADER VER "R5G008"
3/2/2015 8:10:09 PM LOADER AID: 0001
3/2/2015 8:10:10 PM DEVICE ID: 1A48B903
3/2/2015 8:10:10 PM FLASH ID: "0015/00000000"
3/2/2015 8:10:10 PM LOADER VERSION: "R5G008"
3/2/2015 8:10:10 PM  
3/2/2015 8:10:10 PM WRITING PACKAGES ...
3/2/2015 8:10:10 PM Processing package
3/2/2015 8:10:10 PM C:\Users\PC-8\Desktop\s1tool\S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET
3/2/2015 8:10:10 PM  
3/2/2015 8:10:10 PM Processing ACPU files
3/2/2015 8:10:10 PM PROCESSING: boot.sin
3/2/2015 8:10:10 PM FATAL ERROR [ 0x0508:_sin_header_verification, err: 000A ]
3/2/2015 8:10:10 PM error while uploading final HDR block
3/2/2015 8:10:10 PM Break.
3/2/2015 8:10:10 PM FINISHED
3/2/2015 8:10:10 PM Elapsed:20 secs.

Using sir laser uploaded s1tool with "SKIP TA OPEN" with "USE EDL MODE"

After removing Testpoint and pressing READY.
 

2/28/2015 6:14:21 PM Welcome S1 Tool [26.02.2015].
2/28/2015 6:14:21 PM That is small and crippled subset of SETOOL2 service tool.
2/28/2015 6:15:20 PM 
2/28/2015 6:15:20 PM SELECT FIRMWARE PACKAGES
2/28/2015 6:15:20 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2/28/2015 6:15:30 PM CHECKING PACKAGES ...
2/28/2015 6:15:30 PM 
2/28/2015 6:15:30 PM DETACH USB CABLE FROM PHONE
2/28/2015 6:15:30 PM REMOVE BATTERY FROM PHONE
2/28/2015 6:15:30 PM ATTACH TESTPOINT
2/28/2015 6:15:30 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2/28/2015 6:15:30 PM 
2/28/2015 6:15:51 PM will use DLOAD protocol ... 
2/28/2015 6:15:51 PM 0808010600900000
2/28/2015 6:15:51 PM 0D0F50424C5F446C6F6164564552322E30
2/28/2015 6:15:51 PM 162001000100
2/28/2015 6:15:51 PM 17004001000100E1507E00
2/28/2015 6:15:51 PM PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
2/28/2015 6:15:51 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
2/28/2015 6:15:51 PM PROCESSING ...
2/28/2015 6:15:52 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"
2/28/2015 6:15:52 PM 
2/28/2015 6:16:01 PM llbug: write error: "The device does not recognize the command"
2/28/2015 6:16:01 PM llbug: blk write fail.fatal
2/28/2015 6:16:01 PM qcSendPacket: can't send packet.
2/28/2015 6:16:01 PM Elapsed:40 secs.
2/28/2015 6:16:08 PM 

After not removing Testpoint and pressing READY.

2/28/2015 6:16:08 PM SELECT FIRMWARE PACKAGES
2/28/2015 6:16:08 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2/28/2015 6:16:09 PM CHECKING PACKAGES ...
2/28/2015 6:16:09 PM 
2/28/2015 6:16:09 PM DETACH USB CABLE FROM PHONE
2/28/2015 6:16:09 PM REMOVE BATTERY FROM PHONE
2/28/2015 6:16:09 PM ATTACH TESTPOINT
2/28/2015 6:16:09 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2/28/2015 6:16:09 PM 
2/28/2015 6:16:15 PM will use DLOAD protocol ... 
2/28/2015 6:16:15 PM 0808010600900000
2/28/2015 6:16:15 PM 0D0F50424C5F446C6F6164564552322E30
2/28/2015 6:16:15 PM 162001000100
2/28/2015 6:16:15 PM 17004001000100E1507E00
2/28/2015 6:16:15 PM PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
2/28/2015 6:16:15 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9 EC7074DDAE8B05CDC8E1
2/28/2015 6:16:15 PM PROCESSING ...
2/28/2015 6:16:16 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"
2/28/2015 6:16:16 PM 
2/28/2015 6:16:17 PM Emergency loader uploaded ...
2/28/2015 6:16:27 PM 
2/28/2015 6:16:27 PM RUNNING S1_PRELOADER VER "R5G008"
2/28/2015 6:16:27 PM LOADER AID: 0001
2/28/2015 6:16:28 PM DEVICE ID: 1A48B903
2/28/2015 6:16:28 PM FLASH ID: "0015/00000000"
2/28/2015 6:16:28 PM LOADER VERSION: "R5G008"
2/28/2015 6:16:28 PM 
2/28/2015 6:16:28 PM WRITING PACKAGES ...
2/28/2015 6:16:28 PM Elapsed:20 secs.
2/28/2015 6:16:36 PM PROCEDURE STOPPED BY USER

But after i click "SKIP TA OPEN" and click FLASH the "check" on SKIP TA OPEN will disappear.

I mean same happens when i flash "s1boot.sin_file_set" or APPSW, FSP, ELABEL.sin_file_set

2/25/2015 11:11:45 PM Welcome S1 Tool [06.02.2015].
2/25/2015 11:11:45 PM That is small and crippled subset of SETOOL2 service tool.
2/25/2015 11:11:49 PM 
2/25/2015 11:11:49 PM SELECT FIRMWARE PACKAGES
2/25/2015 11:11:49 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2/25/2015 11:11:53 PM CHECKING PACKAGES ...
2/24/2015 11:11:53 PM 
2/25/2015 11:11:53 PM DETACH USB CABLE FROM PHONE
2/25/2015 11:11:53 PM REMOVE BATTERY FROM PHONE
2/25/2015 11:11:53 PM ATTACH TESTPOINT
2/25/2015 11:11:53 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2/25/2015 11:11:53 PM 
2/25/2015 11:12:00 PM will use DLOAD protocol ... 
2/25/2015 11:12:00 PM 0808010600900000
2/25/2015 11:12:00 PM 0D0F50424C5F446C6F6164564552322E30
2/25/2015 11:12:00 PM 162001000100
2/25/2015 11:12:00 PM 17004001000100E1507E00
2/25/2015 11:12:00 PM PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
2/25/2015 11:12:00 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
2/25/2015 11:12:00 PM PROCESSING ...
2/25/2015 11:12:01 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"
2/25/2015 11:12:01 PM 
2/25/2015 11:12:03 PM Emergency loader uploaded ...
2/25/2015 11:12:04 PM 
2/25/2015 11:12:04 PM RUNNING S1_PRELOADER VER "R5G008"
2/25/2015 11:12:04 PM LOADER AID: 0001
2/25/2015 11:12:04 PM DEVICE ID: 1A48B903
2/25/2015 11:12:04 PM FLASH ID: "0015/00000000"
2/25/2015 11:12:04 PM LOADER VERSION: "R5G008"
2/25/2015 11:12:04 PM 
2/25/2015 11:12:05 PM WRITING PACKAGES ...
2/25/2015 11:12:05 PM Elapsed:15 secs.
2/25/2015 11:13:27 PM PROCEDURE STOPPED BY USER

I'm doing testpoint properly sir, please see my other previous comments with attach pic of installing "qhsusb_dload" and it's completely installed "Qaualcomm HS-USB QDLoader 9008 (COM10)" then you said force windows update thru Gordon's Gate Flash Driver namely "Zeus Flash Device", right?

It's okay with me with TeamViewer.

Later you will be online on skype? Inform me.

Done fixing that error. Usb plug is loose.

After that i completely flash APPSW, FSP and ELABEL.sin_file_set, but same happens on flashing s1boot only.

"WRITING PACKAGES..

Elapsed: (secs)"

I research on internet why FLASH ID "0015/00000000" is always show "0". Some comments/post they lost drm keys. I think mine is the same, i lost my drm keys thats why it always show "0". Some other told that they not backup their TA partition after unlocking bootloader, thats why all the important on their phone is all wipe (ithink).

I really need your help. Please share any idea on how to fix that problem. No TA backup, lost drm keys on bricked phone

Copying TA backup on the same phone, same model Xperia SP C5303, it is possible to fix that problem?