93 replies to this topic

[Jurij]

 

But I didn't delete a file during the firmware building.

 

What file?

[jasonteoch]

What file?

i follow the steps in 

Please Login or Register to see this Hidden Content

 

but I forgotten to delete fwinfo.xml

 

that why i flashed a corrupted firmware and now could not boot up

[Jurij]

It must be a bug in xperia firmware downloader... I never unpack files from Xperia Downloader and i do not use flashtool, so i've never had any problems, like yours. Anyway if your phone can't be detected in flash mode by any tool, buy working xperia Z ultra with broken LCD and swap main board. No other solutions

[Ndirev]

My phone dead after restore different stock rom on xperia z3 compact root with locked boot loader.. And now phone only red flashing light when connect to charger and solid led light when push power button.. Flashtool cannot detect my phone.. What should i do to revive the phone ? Really apreciate if u want to help

[Jurij]

This is thread about Xperia Z Ultra. Z3 Compact is not supported at all, buy working phone with broken lcd and swap main board.

[samsamsam]

Please advise me.

I tried reboot by this s1tool. But I can't make install my phone in following,

 

============== Quote ==========================

Welcome S1 Tool [06.02.2015].
That is small and crippled subset of SETOOL2 service tool.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 9A338F02
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH 94D75DEA38267870ADBAF0B2ED3DB3EAEE3AC37C55D7BBB26FB57DB9F0703EBC NOT SUPPORTED
Elapsed:101 secs.

=========== Unquote ========================

 

When I had made flashed C6833_14.5.A.0.270_HK to my phone C6806 GPE by Flashtool, it got the hard brick. No turn on.

I used the flashed file as follow link then.

Please Login or Register to see this Hidden Content

[Jurij]

Sorry, i can't help you, as there is no S1 Emergency loader for C6806 phone in S1tool. But if you've just flashed different firmware, you should be able to flash it again. Try deep reset procedure (hold hard reset button for at least 120 seconds) then try to flash your phone:

 

[samsamsam]

Thank you Sir.
I have tried the deep reset. But the phone is turned on again.
I have tried the flash again. I connected USB pushing volume down button. But phone doesn't make flash mode. Therefore the flash tool can't catch the phone.
 
I can choice the all solution, that I buy working xperia Z ultra with broken LCD and swap main board.
 
Many thanks again.
 
I leave the flash log when I bricked the phone from 6806 to 6833.

 

07/001/2015 22:01:15 - INFO  - Flashtool Version 0.9.19.8 built on 24-09-2015 22:00:00
07/001/2015 22:01:15 - INFO  - Executing search strategies to find proxy selector
07/001/2015 22:01:15 - INFO  - No proxy found for IE. Trying next one
07/001/2015 22:01:15 - INFO  - Strategy firefox failed trying next one : No Firefox installation found
07/001/2015 22:01:15 - INFO  - No proxy found for java. Trying next one
07/001/2015 22:01:16 - INFO  - Syncing devices from github
07/001/2015 22:01:17 - INFO  - Scanning devices folder for changes.
07/001/2015 22:01:28 - INFO  - Pulling changes from github.
07/001/2015 22:01:29 - INFO  - Devices sync finished.
07/001/2015 22:01:33 - INFO  - Device disconnected
07/027/2015 22:27:30 - INFO  - Selected Bundle for Sony Xperia Z Ultra (C6833). FW release : 14.5.A.0.270. Customization : HK
07/027/2015 22:27:30 - INFO  - Preparing files for flashing
07/028/2015 22:28:24 - INFO  - Please connect your device into flashmode.
07/030/2015 22:30:41 - INFO  - Device connected with USB debugging off
07/030/2015 22:30:41 - INFO  - For 2011 devices line, be sure you are not in MTP mode
07/030/2015 22:30:52 - INFO  - Device disconnected
07/031/2015 22:31:01 - INFO  - Device connected in flash mode
07/031/2015 22:31:01 - INFO  - Opening device for R/W
07/031/2015 22:31:01 - INFO  - Reading device information
07/031/2015 22:31:01 - INFO  - Phone ready for flashmode operations.
07/031/2015 22:31:01 - INFO  - Opening TA partition 2
07/031/2015 22:31:01 - INFO  - Current device : C6806 - EP7341L2MD - 1278-8069_R3C - 1278-7499_private - GOOGLE-LTE_private
07/031/2015 22:31:01 - INFO  - Closing TA partition
07/031/2015 22:31:01 - INFO  - Start Flashing
07/031/2015 22:31:01 - INFO  - Processing loader.sin
07/031/2015 22:31:01 - INFO  -     Checking header
07/031/2015 22:31:01 - INFO  -     Flashing data
07/031/2015 22:31:01 - INFO  - Loader : S1_Root_6732 - Version : LOADER_RELEASE_MSM8974_32_AID_4 / Boot version : S1_Boot_MSM8974_GPE_6 / Bootloader status : ROOTABLE
07/031/2015 22:31:01 - INFO  - Max packet size set to 512K
07/031/2015 22:31:02 - INFO  - Making a TA backup
07/031/2015 22:31:02 - INFO  - Opening TA partition 1
07/031/2015 22:31:02 - INFO  - Start Dumping TA partition 1
07/031/2015 22:31:02 - INFO  - Finished Dumping TA partition 1
07/031/2015 22:31:02 - INFO  - TA partition 1 saved to C:\Users\???\.flashTool\registeredDevices\EP7341L2MD\s1ta\2015-12-07_10-31-02\1.ta
07/031/2015 22:31:02 - INFO  - Closing TA partition
07/031/2015 22:31:02 - INFO  - Opening TA partition 2
07/031/2015 22:31:02 - INFO  - Start Dumping TA partition 2
07/031/2015 22:31:03 - INFO  - Finished Dumping TA partition 2
07/031/2015 22:31:03 - INFO  - TA partition 2 saved to C:\Users\???\.flashTool\registeredDevices\EP7341L2MD\s1ta\2015-12-07_10-31-02\2.ta
07/031/2015 22:31:03 - INFO  - Closing TA partition
07/031/2015 22:31:03 - INFO  - Parsing boot delivery
07/031/2015 22:31:03 - INFO  - No flash script found. Using 0.9.18 flash engine
07/031/2015 22:31:03 - INFO  - Opening TA partition 2
07/031/2015 22:31:03 - INFO  - Writing TA unit 00002774. Value : [01]
07/031/2015 22:31:03 - INFO  - Closing TA partition
07/031/2015 22:31:03 - INFO  - Processing partition-image.sin
07/031/2015 22:31:03 - INFO  -     Checking header
07/031/2015 22:31:03 - INFO  -     Flashing data
07/031/2015 22:31:04 - INFO  - Phone boot version : S1_Boot_MSM8974_GPE_6. Boot delivery version : S1_Boot_MSM8974_Rhine1.3_LA1.04_11
07/031/2015 22:31:04 - INFO  - Going to flash boot delivery
07/031/2015 22:31:04 - INFO  - Opening TA partition 2
07/031/2015 22:31:05 - INFO  - Processing emmc_appsboot_S1_Boot_MSM8974_Rhine1.3_1.04_11_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
07/031/2015 22:31:05 - INFO  -     Checking header
07/031/2015 22:31:05 - INFO  -     Flashing data
07/031/2015 22:31:05 - INFO  - Closing TA partition
07/031/2015 22:31:05 - INFO  - Opening TA partition 2
07/031/2015 22:31:05 - INFO  - Flashing Amami_S1BootConfig_MiscTA_130115_1430.ta to partition 2
07/031/2015 22:31:05 - INFO  - Writing TA unit 0000084f. Value : [1A, CE, 1D, 00, 01, 00, 04, 05, 00, 02, 02, 51, 00, 10, 03, 00, 02, 04, 02, 05, 00, 01, 03, 02, 00, 10, 05, 00, 03, 03, 05, 00, 10, 0A, 00, 02, 00, A9, 09, BE, BA, A9, 09, 00, 00, 04, 00, 03, 00, 02, 00, 04, 00, 04, 00, B0, 04, 0E, 00, 06, 00, B8, 0B, 01, 4B, 00, 00, 00, 03, 96, 00, 2C, 01]
07/031/2015 22:31:05 - INFO  - Writing TA unit 000008fd. Value : [00]
07/031/2015 22:31:05 - INFO  - Closing TA partition
07/031/2015 22:31:05 - INFO  - Opening TA partition 2
07/031/2015 22:31:05 - INFO  - Processing dbi_S1_Boot_MSM8974_Rhine1.3_1.04_11_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin
07/031/2015 22:31:05 - INFO  -     Checking header
07/031/2015 22:31:05 - INFO  -     Flashing data
07/031/2015 22:31:05 - INFO  - Processing s1sbl_S1_Boot_MSM8974_Rhine1.3_1.04_11_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
07/031/2015 22:31:05 - INFO  -     Checking header
07/031/2015 22:31:05 - INFO  -     Flashing data
07/031/2015 22:31:05 - INFO  - Processing sbl1_S1_Boot_MSM8974_Rhine1.3_1.04_11_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
07/031/2015 22:31:05 - INFO  -     Checking header
07/031/2015 22:31:05 - INFO  -     Flashing data
07/031/2015 22:31:05 - INFO  - Processing tz_S1_Boot_MSM8974_Rhine1.3_1.04_11_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
07/031/2015 22:31:05 - INFO  -     Checking header
07/031/2015 22:31:05 - INFO  -     Flashing data
07/031/2015 22:31:05 - INFO  - Closing TA partition
07/031/2015 22:31:05 - INFO  - Opening TA partition 2
07/031/2015 22:31:05 - INFO  - Closing TA partition
07/031/2015 22:31:06 - INFO  - Opening TA partition 2
07/031/2015 22:31:06 - INFO  - Processing amss_fsg.sin
07/031/2015 22:31:06 - INFO  -     Checking header
07/031/2015 22:31:06 - INFO  -     Flashing data
07/031/2015 22:31:06 - INFO  - Processing amss_fs_1.sin
07/031/2015 22:31:06 - INFO  -     Checking header
07/031/2015 22:31:06 - INFO  -     Flashing data
07/031/2015 22:31:06 - INFO  - Processing amss_fs_2.sin
07/031/2015 22:31:06 - INFO  -     Checking header
07/031/2015 22:31:06 - INFO  -     Flashing data
07/031/2015 22:31:06 - INFO  - Processing apps_log.sin
07/031/2015 22:31:06 - INFO  -     Checking header
07/031/2015 22:31:06 - INFO  -     Flashing data
07/031/2015 22:31:06 - INFO  - Processing cache.sin
07/031/2015 22:31:06 - INFO  -     Checking header
07/031/2015 22:31:06 - INFO  -     Flashing data
07/031/2015 22:31:07 - INFO  - Processing fotakernel.sin
07/031/2015 22:31:07 - INFO  -     Checking header
07/031/2015 22:31:07 - INFO  -     Flashing data
07/031/2015 22:31:09 - INFO  - Processing kernel.sin
07/031/2015 22:31:09 - INFO  -     Checking header
07/031/2015 22:31:09 - INFO  -     Flashing data
07/031/2015 22:31:10 - INFO  - Processing rpm.sin
07/031/2015 22:31:10 - INFO  -     Checking header
07/031/2015 22:31:10 - INFO  -     Flashing data
07/031/2015 22:31:11 - INFO  - Closing TA partition
07/031/2015 22:31:11 - INFO  - Opening TA partition 2
07/031/2015 22:31:11 - INFO  - Processing system.sin
07/031/2015 22:31:11 - INFO  -     Checking header
07/031/2015 22:31:11 - INFO  -     Flashing data
07/035/2015 22:35:52 - INFO  - Processing userdata.sin
07/035/2015 22:35:52 - INFO  -     Checking header
07/035/2015 22:35:52 - INFO  -     Flashing data
07/036/2015 22:36:27 - INFO  - Closing TA partition
07/036/2015 22:36:27 - INFO  - Opening TA partition 2
07/036/2015 22:36:27 - INFO  - Flashing cust-reset.ta to partition 2
07/036/2015 22:36:27 - INFO  - Writing TA unit 000008A4. Value : [00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00]
07/036/2015 22:36:27 - INFO  - Flashing fota-reset.ta to partition 2
07/036/2015 22:36:27 - INFO  - Writing TA unit 00000964. Value : [00]
07/036/2015 22:36:27 - INFO  - Closing TA partition
07/036/2015 22:36:27 - INFO  - Opening TA partition 2
07/036/2015 22:36:27 - INFO  - Processing elabel-C6833-row_201310161732.1_14.5.A.0.270.sin
07/036/2015 22:36:27 - INFO  -     Checking header
07/036/2015 22:36:27 - INFO  -     Flashing data
07/036/2015 22:36:30 - INFO  - Closing TA partition
07/036/2015 22:36:30 - INFO  - Opening TA partition 2
07/036/2015 22:36:30 - INFO  - Writing TA unit 00002725. Value : [32, 30, 31, 35, 2D, 31, 32, 2D, 30, 37, 20, 32, 32, 3A, 33, 36, 3A, 33, 30, 00]
07/036/2015 22:36:30 - INFO  - Writing TA unit 00002774. Value : [00]
07/036/2015 22:36:30 - INFO  - Closing TA partition
07/036/2015 22:36:30 - INFO  - Ending flash session
07/036/2015 22:36:30 - INFO  - Flashing finished.
07/036/2015 22:36:30 - INFO  - Please unplug and start your phone
07/036/2015 22:36:30 - INFO  - For flashtool, Unknown Sources and Debugging must be checked in phone settings
07/036/2015 22:36:30 - INFO  - Device connected in flash mode

[Jurij]

You must hold vol- and reset button together, then release reset button, hold vol- and attach usb cable. Something like that.

[samsamsam]

Thank you Sir.

 

I tried your saying.  When the usb cable is attached the phone, the red LED is flashed for two second.

But the phone does't make the flash mode. The phone says nothing.

 

I am going to try something like that.

 

I appreciate your advice.

[Norph]

Hello there thank you very much for this  tutorial!
I know that I am replying on a wrong forum but I have a Z1 compact and I dont see a post like this on the Z1 Compact so I wanted to ask if this means that I succeed on flashing using s1 tools or not,

 

12/18/2015 1:29:56 AM ATTACH TESTPOINT
12/18/2015 1:29:56 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
12/18/2015 1:29:56 AM  
12/18/2015 1:30:51 AM will use Sahara protocol ... 
12/18/2015 1:30:51 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"
12/18/2015 1:30:51 AM  
12/18/2015 1:31:07 AM PROCESSING ...
12/18/2015 1:31:07 AM SERIAL NUMBER : F2570E06
12/18/2015 1:31:07 AM HARDWARE ID : 04000100E1007B00
12/18/2015 1:31:07 AM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
12/18/2015 1:31:07 AM Emergency loader uploaded ...
12/18/2015 1:31:07 AM  
12/18/2015 1:31:07 AM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
12/18/2015 1:31:07 AM LOADER AID: 0004
12/18/2015 1:31:08 AM DEVICE ID: 060E57F2
12/18/2015 1:31:08 AM FLASH ID: "0015/01000001"
12/18/2015 1:31:08 AM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
12/18/2015 1:31:08 AM  
12/18/2015 1:31:08 AM WRITING PACKAGES ...
12/18/2015 1:31:08 AM Processing package
12/18/2015 1:31:08 AM C:\Users\Sibeh\Desktop\fw\amami_testpoint.SIN_FILE_SET
12/18/2015 1:31:08 AM  
12/18/2015 1:31:08 AM WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_RHINE1.2_LA1.04_19
12/18/2015 1:31:08 AM PARSING: "DEVELOPMENT"
12/18/2015 1:31:08 AM value OTP_LOCK_STATUS_1 :  UNLOCKED, not match LOCKED
12/18/2015 1:31:08 AM PARSING: "TEST_OEM0_007B00E1"
12/18/2015 1:31:08 AM value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
12/18/2015 1:31:08 AM value OTP_DATA_1 :  00000100, not match 01000400
12/18/2015 1:31:08 AM value IDCODE_1 : 007B00E1, match 007B00E1
12/18/2015 1:31:08 AM PARSING: "PRECOMMERCIAL_007B00E1"
12/18/2015 1:31:08 AM value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
12/18/2015 1:31:08 AM value OTP_DATA_1 : 01000400, match 01000400
12/18/2015 1:31:08 AM value IDCODE_1 : 007B00E1, match 007B00E1
12/18/2015 1:31:08 AM PROCESSING : dbi_S1_Boot_MSM8974_Rhine1.2_19_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin
12/18/2015 1:31:08 AM PROCESSING : emmc_appsboot_S1_Boot_MSM8974_Rhine1.2_19_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
12/18/2015 1:31:08 AM PROCESSING : s1sbl_S1_Boot_MSM8974_Rhine1.2_19_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
12/18/2015 1:31:09 AM PROCESSING : sbl1_S1_Boot_MSM8974_Rhine1.2_19_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
12/18/2015 1:31:09 AM PROCESSING : tz_S1_Boot_MSM8974_Rhine1.2_19_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
12/18/2015 1:31:09 AM PROCESSING : Amami_S1BootConfig_MiscTA_130115_1430.ta
12/18/2015 1:31:09 AM MINOR ERROR [ Open_TA_failed, err: 001D ]
12/18/2015 1:31:09 AM BOOT UPDATED
12/18/2015 1:31:09 AM Processing ACPU files
12/18/2015 1:31:09 AM PROCESSING: apps_log_S1-SW-LIVE-6732-PID1-0005-MMC.sin
12/18/2015 1:31:09 AM PROCESSING: cache_S1-SW-LIVE-6732-PID1-0005-MMC.sin
12/18/2015 1:31:10 AM PROCESSING: fotakernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
12/18/2015 1:31:12 AM PROCESSING: kernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
12/18/2015 1:31:13 AM SKIP: partition-image_S1-SW-LIVE-6732-PID1-0005-MBR.sin
12/18/2015 1:31:13 AM PROCESSING: rpm_S1-RPMFW-LIVE-6732-PID1-0005-MMC.sin
12/18/2015 1:31:13 AM no update files in package
12/18/2015 1:31:13 AM FINISHED
12/18/2015 1:31:13 AM Elapsed:78 secs.

 

Thanks!

[Jurij]

Yes, you did, but you must flash all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

to have working phone.

[Norph]

I see that's good news !
But may I ask where can I find the files or is there any link to find or download the APPSW, FSP and ELABEL?
And I think my phone is still stuck there because my battery still refusing to charge....
Thanks!

[Jurij]

I don't know, i use files from paid support area. Try Xperia firmware downloader, but do not unpack files, just rename them to .sin_file_set.

[Norph]

Thank you so much I will try out that solution and then I will get back here, even know that I have the downloaded files but sadly unpacked...

I guess I will try downloading back and rename them to be safe.

Thank you very much till this point sir!

Hmm... I faced another error and I think it's a problem with my FSP.sin_file_set,
the error is as shown below 

 

 

12/19/2015 2:07:19 PM SELECT FIRMWARE PACKAGES

12/19/2015 2:07:19 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/19/2015 2:07:20 PM CHECKING PACKAGES ...

12/19/2015 2:07:20 PM  

12/19/2015 2:07:20 PM DETACH USB CABLE FROM PHONE

12/19/2015 2:07:20 PM REMOVE BATTERY FROM PHONE

12/19/2015 2:07:20 PM ATTACH TESTPOINT

12/19/2015 2:07:20 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/19/2015 2:07:20 PM  

12/19/2015 2:07:33 PM will use Sahara protocol ... 

12/19/2015 2:07:33 PM REMOVE TESTPOINT NOW, THEN PRESS "READY"

12/19/2015 2:07:33 PM  

12/19/2015 2:07:36 PM PROCESSING ...

12/19/2015 2:07:36 PM SERIAL NUMBER : F2570E06

12/19/2015 2:07:36 PM HARDWARE ID : 04000100E1007B00

12/19/2015 2:07:36 PM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

12/19/2015 2:07:36 PM Emergency loader uploaded ...

12/19/2015 2:07:36 PM  

12/19/2015 2:07:36 PM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/19/2015 2:07:36 PM LOADER AID: 0004

12/19/2015 2:07:37 PM DEVICE ID: 060E57F2

12/19/2015 2:07:37 PM FLASH ID: "0015/01000001"

12/19/2015 2:07:37 PM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/19/2015 2:07:37 PM  

12/19/2015 2:07:37 PM WRITING PACKAGES ...

12/19/2015 2:07:37 PM Processing package

12/19/2015 2:07:37 PM C:\Users\Sibeh\Desktop\fw\FSP.sin_file_set

12/19/2015 2:07:37 PM  

12/19/2015 2:07:37 PM Processing ACPU files

12/19/2015 2:07:37 PM PROCESSING: amss_fs_1.sin

12/19/2015 2:07:37 PM UNPACK ERROR: "Deflate64 compression method is not supported - Native error: 00055"

12/19/2015 2:07:37 PM Break.

12/19/2015 2:07:37 PM FINISHED

12/19/2015 2:07:37 PM Elapsed:18 secs.

 

I think it's something wrong with my file so I wanted to ask if the files in my FSP has something missing or it's just that I got a bad download and files were corrupted   . (I downloaded them with XperiFirm)

And here's a image of my FSP.sin_file_set

 

Thanks again!

[Jurij]

Reason 1:

 

File is encrypted - use ma3d.exe program to decrypt firmware.

 

Reason 2:

 

You are flashing phone in wrong order. Use order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

Reason 3 - maybe not enough space in hdd temp folder to unpack fsp file...

 

 

Try to unpack fsp file using winrar and zip them again. Maybe it will help.

[Norph]

Hmm this is kinda a dumb question but...
what files do I decrypt from the files I downloaded from XperiFirm?
and from what I understand... I just drag the files I want to decrypt to the ma3d.exe so which folder should I drag it to decrpt?
the main file or, the .out file inside the file, or the .sin file inside the .out file?

Nevermine about the above post...

I am getting this error any idea why? Sorry to keep on asking but I just wanted to know and all the post I can find on google are very old about these post... (around 2008 during Sony Erricson times lol)

 

 

12/20/2015 3:01:14 AM Welcome to S1 tool.

12/20/2015 3:01:14 AM That is small and crippled subset of SETOOL2 service tool.

12/20/2015 3:01:17 AM  

12/20/2015 3:01:17 AM SELECT FIRMWARE PACKAGES

12/20/2015 3:01:17 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 3:01:50 AM CHECKING PACKAGES ...

12/20/2015 3:01:50 AM  

12/20/2015 3:01:50 AM DETACH USB CABLE FROM PHONE

12/20/2015 3:01:50 AM REMOVE BATTERY FROM PHONE

12/20/2015 3:01:50 AM ATTACH TESTPOINT

12/20/2015 3:01:50 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 3:01:50 AM  

12/20/2015 3:02:24 AM will use Sahara protocol ... 

12/20/2015 3:02:24 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"

12/20/2015 3:02:24 AM  

12/20/2015 3:02:26 AM PROCESSING ...

12/20/2015 3:02:26 AM SERIAL NUMBER : F2570E06

12/20/2015 3:02:26 AM HARDWARE ID : 04000100E1007B00

12/20/2015 3:02:26 AM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

12/20/2015 3:02:26 AM Emergency loader uploaded ...

12/20/2015 3:02:26 AM  

12/20/2015 3:02:26 AM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 3:02:27 AM LOADER AID: 0004

12/20/2015 3:02:27 AM DEVICE ID: 060E57F2

12/20/2015 3:02:27 AM FLASH ID: "0015/01000001"

12/20/2015 3:02:27 AM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 3:02:27 AM  

12/20/2015 3:02:27 AM WRITING PACKAGES ...

12/20/2015 3:02:27 AM Processing package

12/20/2015 3:02:27 AM C:\Users\Sibeh\Desktop\fw\FSP.sin_file_set

12/20/2015 3:02:27 AM  

12/20/2015 3:02:27 AM Processing ACPU files

12/20/2015 3:02:27 AM PROCESSING: system_S1-SW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 3:03:01 AM bad file, will not flash it.

12/20/2015 3:03:01 AM Break.

12/20/2015 3:03:01 AM FINISHED

12/20/2015 3:03:01 AM Elapsed:103 secs.

 

Oh nevermine! Thank you very much sir Jurij! 

 

I succeed on flashing all part of APPSW, FSP, and also ELABEL on my z1c, now I have to wait till tomorrow to see if it's working or not because I have to leave it to charge since the battery is 0%!

 

Thank you very much sir!

 

I will upload the files I used to rescue my Z1c if my phone manage to boot up tomorrow, but this is the flash log for the last 2 parts and I am pretty sure I succeeded. (lol charger is now dead, time to borrow my sis samsung's charger to charge my 0% battery phone...)
 

 

12/20/2015 5:01:29 AM Welcome S1 Tool [19.05.2015].

12/20/2015 5:01:29 AM That is small and crippled subset of SETOOL2 service tool.

12/20/2015 5:01:33 AM  

12/20/2015 5:01:33 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:01:33 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:01:37 AM CHECKING PACKAGES ...

12/20/2015 5:01:37 AM  

12/20/2015 5:01:37 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:01:37 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:01:37 AM ATTACH TESTPOINT

12/20/2015 5:01:37 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:01:37 AM  

12/20/2015 5:02:06 AM llbug: [\\?\USB#VID_0FCE&PID_D19A#5&12ff2dd2&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"

12/20/2015 5:02:06 AM Elapsed:33 secs.

12/20/2015 5:02:08 AM  

12/20/2015 5:02:08 AM TO CONNECT NEXT PHONES

12/20/2015 5:02:08 AM X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro

12/20/2015 5:02:08 AM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY

12/20/2015 5:02:08 AM PRESS AND HOLD "BACK" BUTTON...

12/20/2015 5:02:09 AM  

12/20/2015 5:02:09 AM ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro

12/20/2015 5:02:09 AM and Sony Xperia phone

12/20/2015 5:02:09 AM PRESS AND HOLD "Volume Down" BUTTON...

12/20/2015 5:02:09 AM  

12/20/2015 5:02:09 AM PLEASE ATTACH TURNED OFF PHONE NOW

12/20/2015 5:02:09 AM Waiting for phone ...

12/20/2015 5:02:15 AM PROCEDURE STOPPED BY USER

12/20/2015 5:02:15 AM Elapsed:6 secs.

12/20/2015 5:02:18 AM  

12/20/2015 5:02:18 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:02:18 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:02:20 AM CHECKING PACKAGES ...

12/20/2015 5:02:20 AM  

12/20/2015 5:02:20 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:02:20 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:02:20 AM ATTACH TESTPOINT

12/20/2015 5:02:20 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:02:20 AM  

12/20/2015 5:02:36 AM llbug: [\\?\USB#VID_0FCE&PID_D19A#5&12ff2dd2&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"

12/20/2015 5:02:36 AM Elapsed:18 secs.

12/20/2015 5:02:41 AM  

12/20/2015 5:02:41 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:02:41 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:02:43 AM CHECKING PACKAGES ...

12/20/2015 5:02:43 AM  

12/20/2015 5:02:43 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:02:43 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:02:43 AM ATTACH TESTPOINT

12/20/2015 5:02:43 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:02:43 AM  

12/20/2015 5:03:13 AM llbug: [\\?\USB#VID_0FCE&PID_D19A#5&12ff2dd2&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"

12/20/2015 5:03:13 AM Elapsed:31 secs.

12/20/2015 5:03:16 AM  

12/20/2015 5:03:16 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:03:16 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:03:18 AM CHECKING PACKAGES ...

12/20/2015 5:03:18 AM  

12/20/2015 5:03:18 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:03:18 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:03:18 AM ATTACH TESTPOINT

12/20/2015 5:03:18 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:03:18 AM  

12/20/2015 5:03:22 AM will use Sahara protocol ... 

12/20/2015 5:03:22 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"

12/20/2015 5:03:22 AM  

12/20/2015 5:03:24 AM PROCESSING ...

12/20/2015 5:03:24 AM SERIAL NUMBER : F2570E06

12/20/2015 5:03:24 AM HARDWARE ID : 04000100E1007B00

12/20/2015 5:03:24 AM PRODUCT DETECTED: "MSM8974 OEM1 fused"

12/20/2015 5:03:24 AM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

12/20/2015 5:03:24 AM Emergency loader uploaded ...

12/20/2015 5:03:25 AM  

12/20/2015 5:03:25 AM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:03:25 AM LOADER AID: 0004

12/20/2015 5:03:25 AM DEVICE ID: 060E57F2

12/20/2015 5:03:25 AM FLASH ID: "0015/01000001"

12/20/2015 5:03:25 AM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:03:25 AM  

12/20/2015 5:03:25 AM WRITING PACKAGES ...

12/20/2015 5:03:25 AM Processing package

12/20/2015 5:03:25 AM C:\Users\Sibeh\Downloads\s1tool\FSP.sin_file_set

12/20/2015 5:03:25 AM  

12/20/2015 5:03:25 AM Processing ACPU files

12/20/2015 5:03:25 AM PROCESSING: amss_fs_2_S1-MODEMSW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 5:03:25 AM PROCESSING: amss_fsg_S1-MODEMSW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 5:03:25 AM PROCESSING: system_S1-SW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 5:08:11 AM PROCESSING: userdata_S1-SW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 5:08:43 AM PROCESSING: amss_fs_1_S1-MODEMSW-LIVE-6732-PID1-0005-MMC.sin

12/20/2015 5:08:43 AM Processing update files

12/20/2015 5:08:43 AM PROCESSING: cust-reset.ta

12/20/2015 5:08:43 AM Writing TA var 0002/08A4/000E

12/20/2015 5:08:43 AM PROCESSING: fota-reset.ta

12/20/2015 5:08:43 AM Writing TA var 0002/0964/0001

12/20/2015 5:08:43 AM SKIP: simlock.ta

12/20/2015 5:08:43 AM FINISHED

12/20/2015 5:08:43 AM Elapsed:327 secs.

12/20/2015 5:08:52 AM  

12/20/2015 5:08:52 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:08:52 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:08:55 AM CHECKING PACKAGES ...

12/20/2015 5:08:55 AM  

12/20/2015 5:08:55 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:08:55 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:08:55 AM ATTACH TESTPOINT

12/20/2015 5:08:55 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:08:55 AM  

12/20/2015 5:09:16 AM llbug: [\\?\USB#VID_0FCE&PID_D19A#5&12ff2dd2&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"

12/20/2015 5:09:16 AM Elapsed:24 secs.

12/20/2015 5:09:19 AM  

12/20/2015 5:09:19 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:09:19 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:09:21 AM CHECKING PACKAGES ...

12/20/2015 5:09:21 AM  

12/20/2015 5:09:21 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:09:21 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:09:21 AM ATTACH TESTPOINT

12/20/2015 5:09:21 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:09:21 AM  

12/20/2015 5:09:25 AM will use Sahara protocol ... 

12/20/2015 5:09:25 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"

12/20/2015 5:09:25 AM  

12/20/2015 5:09:27 AM PROCESSING ...

12/20/2015 5:09:27 AM SERIAL NUMBER : F2570E06

12/20/2015 5:09:27 AM HARDWARE ID : 04000100E1007B00

12/20/2015 5:09:27 AM PRODUCT DETECTED: "MSM8974 OEM1 fused"

12/20/2015 5:09:27 AM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

12/20/2015 5:09:27 AM Emergency loader uploaded ...

12/20/2015 5:09:28 AM  

12/20/2015 5:09:28 AM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:09:28 AM LOADER AID: 0004

12/20/2015 5:09:28 AM DEVICE ID: 060E57F2

12/20/2015 5:09:28 AM FLASH ID: "0015/01000001"

12/20/2015 5:09:28 AM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:09:28 AM  

12/20/2015 5:09:28 AM WRITING PACKAGES ...

12/20/2015 5:09:28 AM Processing package

12/20/2015 5:09:28 AM C:\Users\Sibeh\Downloads\s1tool\ELABEL.sin_file_set

12/20/2015 5:09:28 AM  

12/20/2015 5:09:28 AM Damaged package

12/20/2015 5:09:28 AM Break.

12/20/2015 5:09:28 AM FINISHED

12/20/2015 5:09:28 AM Elapsed:9 secs.

12/20/2015 5:10:46 AM  

12/20/2015 5:10:46 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:10:46 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:10:48 AM CHECKING PACKAGES ...

12/20/2015 5:10:48 AM  

12/20/2015 5:10:48 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:10:48 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:10:48 AM ATTACH TESTPOINT

12/20/2015 5:10:48 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:10:48 AM  

12/20/2015 5:10:51 AM PROCEDURE STOPPED BY USER

12/20/2015 5:10:51 AM Elapsed:5 secs.

12/20/2015 5:10:53 AM  

12/20/2015 5:10:53 AM SELECT FIRMWARE PACKAGES

12/20/2015 5:10:53 AM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

12/20/2015 5:10:56 AM CHECKING PACKAGES ...

12/20/2015 5:10:56 AM  

12/20/2015 5:10:56 AM DETACH USB CABLE FROM PHONE

12/20/2015 5:10:56 AM REMOVE BATTERY FROM PHONE

12/20/2015 5:10:56 AM ATTACH TESTPOINT

12/20/2015 5:10:56 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE

12/20/2015 5:10:56 AM  

12/20/2015 5:11:32 AM will use Sahara protocol ... 

12/20/2015 5:11:32 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"

12/20/2015 5:11:32 AM  

12/20/2015 5:11:34 AM PROCESSING ...

12/20/2015 5:11:34 AM SERIAL NUMBER : F2570E06

12/20/2015 5:11:34 AM HARDWARE ID : 04000100E1007B00

12/20/2015 5:11:34 AM PRODUCT DETECTED: "MSM8974 OEM1 fused"

12/20/2015 5:11:34 AM HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

12/20/2015 5:11:34 AM Emergency loader uploaded ...

12/20/2015 5:11:35 AM  

12/20/2015 5:11:35 AM RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:11:35 AM LOADER AID: 0004

12/20/2015 5:11:35 AM DEVICE ID: 060E57F2

12/20/2015 5:11:35 AM FLASH ID: "0015/01000001"

12/20/2015 5:11:35 AM LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

12/20/2015 5:11:35 AM  

12/20/2015 5:11:35 AM WRITING PACKAGES ...

12/20/2015 5:11:35 AM Processing package

12/20/2015 5:11:35 AM C:\Users\Sibeh\Downloads\s1tool\ELABEL.sin_file_set

12/20/2015 5:11:35 AM  

12/20/2015 5:11:35 AM Processing ACPU files

12/20/2015 5:11:35 AM PROCESSING: elabel-D5503-row_201511170954066.1_14.6.A.1.236_S1-CUST-LIVE-6732-PID1-0004-MMC.sin

12/20/2015 5:11:38 AM no update files in package

12/20/2015 5:11:38 AM FINISHED

12/20/2015 5:11:38 AM Elapsed:44 secs.

 

The reason I was getting all those errors was...

 

deflate64 error : I changed from windows compressor to change the files inside there into .zip and then I decided to use winrar and everything was fix. O.O

 

bad file, will not flash it : I resolved it by using another version of the_laser from xda s1tool it somehow fixed it and I got the error because the s1tool was older I guess?

 

Please Login or Register to see this Hidden Content

And here's the link I got the s1tool that helped fixed the error for me.

 

Thanks!

[DarkAngel]

I have this problem...

Attached Files

•  Nový rastrový obrázek.bmp   3MB   16 downloads

Edited by DarkAngel, 02 February 2016 - 03:13.

[Jurij]

Try with current S1tool version:  s1tool 28II2015.exe   3.13MB   4780 downloads , but i'm pretty sure it's hardware problem. You can check also ignore ta errors, maybe that will help. And do not upload bmp files, copy log as text and paste in code tags.

[DarkAngel]

Try with current S1tool version: , but i'm pretty sure it's hardware problem. You can check also ignore ta errors, maybe that will help. And do not upload bmp files, copy log as text and paste in code tags.

Welcome S1 Tool [28.02.2015].
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
PROCESSING ...
SERIAL NUMBER : 72F4BC0C
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0CBCF472
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
 
WRITING PACKAGES ...
Processing package
C:\C6833\14_2_A_0_290.APP_SW_Togari_GENERIC_1271_5715_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
 
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:65 secs.