androvidia

I understand that you do not have warranty, that's why visit goot unauthorized service centre. Without charged battery and direct emmc tool there it nothing you can do... Well you can try to buy working phone with broken lcd and swap the main board.

Is that all you can do for me? Do not you have another solution?

I've replied to you, but you don't even read that.

 

1. Visit good service centre - they will charge your battery or check your phone using the charged battery and if it's possible - they will flash your phone if boot area not damaged. I do not know that because you did not posted any logs or informations what phone model you have or what firmware did you flashed.

 

2. If boot area damaged - they can fix your phone by desoldering emmc, flashing boot using external emmc programmer, soldering it back and flashing your phone.

 

That's it.

I compose the used cell phone, there is no guarantee, I even want to pack my cell phone

"Hardbrick" mode does not exist. If you do not know what phone model do you have and what firmware did you flashed, you should never try to flash any phone. Those are basic informations you should know before starting any flashing process. Battery should also be 100% charged. If you do not have equipment, visit good service centre and they will charge your battery in external charger or in a working phone.

Long life I came here hoping to get a help, the translator who put "hardbrick mode" I know what it means. I would like to get help on how to recover a X3 with hardbrick, just that.

If you used proper firmware for example for D6603 you've used D6603 firmware, just try to flash phone using fully charged battery.

Wow, it looks like you're not understanding the situation, my cell phone is in "hardbrick" mode, if it was working for sure I would know ...

What firmware did you flashed into your phone? Any flashing log? Did you tried hard reset trick to connect your phone?

The firmware was from the XperiaFirm, Russian stock. What would that trick be?