blacky199

if i connect mobile without battery and only  test point it only make hid-complaint device in human interface device list

if i connect mobile with battery and test point it make semc flash device but sitool with s1 emergency mode option give phone not support in this mode

Sony C6603 boot repair failed need help 

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162000000000
17004000000000E1907100
180100CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:45 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
llbug: [\\?\USB#VID_05C6&PID_F006#5&1bf0ba15&0&14#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"
Elapsed:10 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
llbug: [\\?\USB#VID_05C6&PID_F006#5&1bf0ba15&0&14#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"
Elapsed:112 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ... 
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162000000000
17004000000000E1907100
180100CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:8 secs.

i am able to coneect in semc flash device

but software give error phone not supported in this mode

any possible solution available? to recover