28 replies to this topic

[loplop4]

Hi, admin can you convert my Z3 ta.img to .SIN_FILE_SET

[Jurij]

I can but there is no point of doing that as your trim area is damaged, writing security units back will not help as you must write back all trim area backup and there is no way to write back trim area backup / sin_file_set at the moment

[loplop4]

i want just to keep it if someday i can recover my mainboard  , that will be not bad, here is my ta 

Attached Files

•  TA.rar   309.28K   106 downloads

[Jurij]

Sorry, i was very busy. Here is security units backup in .sin_file_set format for Sony Xperia Z3 D6603 IMEI 35626506133132:  TA-backup-35626506133132.rar   2.93K   47 downloads Do not try to flash that into another Sony phone, it will brick your phone. And don't forget, that it's just security units backup, in your case you need to write back full backup of trim area partition into your Xperia Z3 D6603 smartphone

[loplop4]

luckily i have the full backup but i will wait until one of the genies    find solution for Z3

 

thanks man.

and for informing other members who have Z3 the test point, is the second point from the battery connector to left its hidden under the connector of the lower parts

[faflak]

Take a picture and check test point will be grateful

[loplop4]

here you are :

 

 Xperia Z3 D6603 testpoint.jpg   60.41K   19 downloads

 

 Xperia Z3 D6603 testpoint.png   221.75K   18 downloads

[Jurij]

Thank you for sharing Sony Xperia Z3 D6603 testpoint picture with us Maybe some day it will be useful for Sony Xperia Z3 owners to fix their phones

[loplop4]

you're all welcome

 

another question, is there a new version of setool software (that not require box or smart card) and support Z3 in any way?

Edited by loplop4, 23 August 2015 - 00:22.

[Jurij]

No.

[loplop4]

i find this in search does it require box, https://mega.co.nz/#...-AJr27vTl_MJ9GQ

[Jurij]

Yes, it require box, and no - it does not support Xperia Z3 in S1 Emergency mode.

[konte]

HI guys,

I have a z3 d6603 hard bricked...i tryed to fix it with s1tool but no way to fix it. After i found the test point and connect it on s1tool i got the message:
 

PROCESSING ...
SERIAL NUMBER : 5F38A60C
HARDWARE ID : 04000100E1407B00
HASH :CF19D6FAD8029B66B15246BF3C9D216FC1D2235D87706E045 8C7125BB1E436EC
HARDWARE ID 04000100E1407B00 NOT SUPPORTED
Elapsed:35 secs.

my device is shown on Device Manager as "SEMC Flash device" when i connect the test point
 

Any ideea how to fix this??

Edited by faflak, 10 September 2015 - 19:30.

[Jurij]

How did you bricked your phone? S1Tool does not support Xperia Z3 at all.

[konte]

Is not my phone, it`s my brother phone. He tryed to update his firmware with a wrong version i mean...After that the phone is dead...when i attach the usb cable only the red led is blinking, also if i press PW and Volume+ the phone is vibrating 3 times.

[Jurij]

 

He tryed to update his firmware with a wrong version i mean...

 

With what version exactly? Any flashing log?

 

After that the phone is dead...when i attach the usb cable only the red led is blinking, also if i press PW and Volume+ the phone is vibrating 3 times.

 

 

Hold volume down button and attach usb cable. Tell me what device do you see in device manager.

[konte]

Hey Jurij....so i can see it only as "USB Input device" if i connect it with volume down to computer.

[Jurij]

Uninstall that device, install Gordon's Gate Flash Driver:  ggsetup-3.0.0.7.exe   3.58MB   14133 downloads , reboot your pc, hold vol- and attach usb cable, check device manager again.

[konte]

Uninstall that device, install Gordon's Gate Flash Driver: , reboot your pc, hold vol- and attach usb cable, check device manager again.

I allready have installed Gordon's gate drivers...with test point connected (with battery off) i can see it as "SEMC Flash device" and if i connect the battery (with test point removed) i see it as "USB Input device".

 

I will try that on another computer cause i installed alot of drivers...

 

Another point...if i press power and volume+ is vibrating 3 times...nothing more...the screen is black...also z3 have a reset point near the sim slot...if i press it holding the power button i got the same think...the phone is vibrating 3 times...nothing more.

Sometimes the red led is blinking when i connect the usb cable...

Edited by konte, 12 September 2015 - 21:10.

[Jurij]

Hold that reset button for at least 120 second, then try to connect your phone with vol-...