131 replies to this topic

[Jurij]

If imei disappeared that means you have flashed wrong firmware version from different model (for example if you have C6916 and you will flash C6903 firmware, your imei will be blank). Flash proper firmware in order: 1.appsw, 2. fsp, 3. elabel. 

[Mubashir]

Help Me Please 

My Phone is hard bricked. I have Xperia Z1 c6903 I am facing this following Error
it is connected as SOMC flash device

Welcome S1 Tool [28.02.2015].
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : 9C168007
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:63 secs.
PROCEDURE STOPPED BY USER

[Jurij]

Loader is not responding, propably due to hardware problem. Buy new phone or working Xperia Z1 with broken lcd and swap main board.

[redsoul]

error.......

my log ,need help  (xperia so-01f)(WIN10 64)   THANK!    

2017/03/23 23:06:43 Welcome to S1 tool.
2017/03/23 23:06:43 That is small and crippled subset of SETOOL2 service tool.
2017/03/23 23:06:57  
2017/03/23 23:06:57 SELECT FIRMWARE PACKAGES
2017/03/23 23:06:57 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
2017/03/23 23:07:00 CHECKING PACKAGES ...
2017/03/23 23:07:00  
2017/03/23 23:07:00 DETACH USB CABLE FROM PHONE
2017/03/23 23:07:00 REMOVE BATTERY FROM PHONE
2017/03/23 23:07:00 ATTACH TESTPOINT
2017/03/23 23:07:00 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
2017/03/23 23:07:00  
2017/03/23 23:07:11 will use Sahara protocol ... 
2017/03/23 23:07:11 REMOVE TESTPOINT NOW, THEN PRESS "READY"
2017/03/23 23:07:11  
2017/03/23 23:07:15 PROCESSING ...
2017/03/23 23:07:15 SERIAL NUMBER : BA562604
2017/03/23 23:07:15 HARDWARE ID : 04000100E1007B00
2017/03/23 23:07:15 HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
2017/03/23 23:07:16 Emergency loader uploaded ...
2017/03/23 23:07:16  
2017/03/23 23:07:16 RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
2017/03/23 23:07:16 LOADER AID: 0004
2017/03/23 23:07:17 DEVICE ID: 042656BA
2017/03/23 23:07:17 FLASH ID: "0011/01000010"
2017/03/23 23:07:17 LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
2017/03/23 23:07:17  
2017/03/23 23:07:17 WRITING PACKAGES ...
2017/03/23 23:07:17 Processing package
2017/03/23 23:07:17 D:\fw\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
2017/03/23 23:07:17  
2017/03/23 23:07:17 MINOR ERROR [ 0x80080021_, err: 0017 ]
2017/03/23 23:07:17 error while uploading final HDR block
2017/03/23 23:07:17 Break.
2017/03/23 23:07:17 FINISHED
2017/03/23 23:07:17 Elapsed:20 secs.
2017/03/23 23:07:25 PROCEDURE STOPPED BY USER
redsoul, on 24 Mar 2017 - 07:34, said:

error.......

my log ,need help  (xperia so-01f)(WIN10 64)   THANK!    

2017/03/23 23:06:43 Welcome to S1 tool.

2017/03/23 23:06:43 That is small and crippled subset of SETOOL2 service tool.

2017/03/23 23:06:57  

2017/03/23 23:06:57 SELECT FIRMWARE PACKAGES

2017/03/23 23:06:57 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

2017/03/23 23:07:00 CHECKING PACKAGES ...

2017/03/23 23:07:00  

2017/03/23 23:07:00 DETACH USB CABLE FROM PHONE

2017/03/23 23:07:00 REMOVE BATTERY FROM PHONE

2017/03/23 23:07:00 ATTACH TESTPOINT

2017/03/23 23:07:00 PRESS "READY", THEN ATTACH USB CABLE TO PHONE

2017/03/23 23:07:00  

2017/03/23 23:07:11 will use Sahara protocol ... 

2017/03/23 23:07:11 REMOVE TESTPOINT NOW, THEN PRESS "READY"

2017/03/23 23:07:11  

2017/03/23 23:07:15 PROCESSING ...

2017/03/23 23:07:15 SERIAL NUMBER : BA562604

2017/03/23 23:07:15 HARDWARE ID : 04000100E1007B00

2017/03/23 23:07:15 HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

2017/03/23 23:07:16 Emergency loader uploaded ...

2017/03/23 23:07:16  

2017/03/23 23:07:16 RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

2017/03/23 23:07:16 LOADER AID: 0004

2017/03/23 23:07:17 DEVICE ID: 042656BA

2017/03/23 23:07:17 FLASH ID: "0011/01000010"

2017/03/23 23:07:17 LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

2017/03/23 23:07:17  

2017/03/23 23:07:17 WRITING PACKAGES ...

2017/03/23 23:07:17 Processing package

2017/03/23 23:07:17 D:\fw\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET

2017/03/23 23:07:17  

2017/03/23 23:07:17 MINOR ERROR [ 0x80080021_, err: 0017 ]

2017/03/23 23:07:17 error while uploading final HDR block

2017/03/23 23:07:17 Break.

2017/03/23 23:07:17 FINISHED

2017/03/23 23:07:17 Elapsed:20 secs.

2017/03/23 23:07:25 PROCEDURE STOPPED BY USER

 

oh!!!!!!!!!!

found  fix!!

 

flash TA_unbrick.SIN_FILE_SET and after that flash amami_testpoint.SIN_FILE_SET

 

and all was fix 

 

when you  can't flash 14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET    or  amami_testpoint.SIN_FILE_SET

 

You must to flash TA_unbrick.SIN_FILE_SET at first . and then you'll found the 14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET    or  amami_testpoint.SIN_FILE_SET

can flash in  !!!!!

 

    sorry for my bad English

Edited by faflak, 25 March 2017 - 20:38.

[Qamar Yamin]

hello everybody,

and firstly thanks to Mr. Jurij for creating a to the point and easy to follow guide, i happened to have bricked my Xperia Z1 C6903 and for over 3 weeks i have been trying to unbrick it, so far no luck.

i have tried a ton of different things but failed with no clue as to what i might be doing wrong.

 

for a summary, my phone was full stock, bootloader locked, but rooted once using Kingoroot app, then unrooted from kingoroot app, and flashed stock 5.1.1 firmware using flashtool and used it for over 2 weeks without issues

used it as second phone for mostly internet and youtube, only apps installed were ES File explorer, MX player and UC browser

at time of brick it was unrooted and bootloader was never unlocked

 

it's a really long story but if any one is interested on how i bricked my Xperia Z1 C6903 here are a few links to my whole story.

How i bricked it

https://forum.xda-developers.com/showpost.php?p=71808603&postcount=696

a little progress explained here (can get into fastboot and Flashmode but nothing works)

https://forum.xda-developers.com/showpost.php?p=71885258&postcount=698

 when using S1 tool i used to get this error

Welcome S1 Tool [06.02.2015].
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
 
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
and Sony Xperia phone
PRESS AND HOLD "Volume Down" BUTTON...
 
PLEASE ATTACH TURNED OFF PHONE NOW
Waiting for phone ...
PROCEDURE STOPPED BY USER
Elapsed:4 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
PROCESSING ...
SERIAL NUMBER : 346FA206
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: DEAD
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:54 secs.

Then following one of your posts here

http://sony.yt/topic/7799-sony-xperia-z1-c6903-software-problem-dead-handset/#entry44741

i did the 120 second reset thing (as 10/15/20 seconds won't do anything)

and then repeated the S1 tool steps again

This time results were different!!!!

this time it doesn't give me the old "can't get S1 command header - LOADER NOT RESPONDING" error, instead it show's a bit more progress, but surprisingly the results are a bit different with two different versions of S1 tool
here are the logs from S1 tool

Log from S1 tool version 6/2/2015

Welcome S1 Tool [06.02.2015].
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : 346FA206
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C7499 8421ADAD42A380F
Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: DEAD
DEVICE ID: 06A26F34
FLASH ID: "0015/01000005"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

WRITING PACKAGES ...
Processing package
C:\Users\Qamar Yamin\.flashTool\firmwares\14_2_A_0_290.APP_SW_Hon ami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MM C.SIN_FILE_SET

WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 : UNLOCKED, match UNLOCKED
PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_1_S1-SDI2-TEST-B316-PID1-0001-SDI_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8 974-TEST-HWID007B00E1-0001-SWID09_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : S1_SBL_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID65_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID00_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID07_S1-BOOT-TEST-B316-0001-MMC.sin
MINOR ERROR [ 0x801E003F_, err: 0017 ]
error while uploading final DATA block
Break.
FINISHED
Elapsed:17 secs.

Log from S1 tool version 19/5/2015

Welcome S1 Tool [19.05.2015].
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : 346FA206
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C7499 8421ADAD42A380F
Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: FFFF
DEVICE ID: 06A26F34
FLASH ID: "0015/01000005"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

WRITING PACKAGES ...
Processing package
C:\Users\Qamar Yamin\Desktop\Xperia Z1 Unbrick\Xperia Z1 C6903 Guide\C6903\14_2_A_0_290.APP_SW_Honami_GENERIC_127 2_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET

WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 : UNLOCKED, match UNLOCKED
PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_1_S1-SDI2-TEST-B316-PID1-0001-SDI_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8 974-TEST-HWID007B00E1-0001-SWID09_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : S1_SBL_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID65_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID00_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID07_S1-BOOT-TEST-B316-0001-MMC.sin
ERROR [ 0x801E003F_, err: 0017 ]
SIN file not accepted
Break.
FINISHED
Elapsed:13 sec

Also i saw your this post here

http://sony.yt/topic/7799-sony-xperia-z1-c6903-software-problem-dead-handset/#entry44808

where yous say "If you see SEMC device after you hold vol- button and connect usb cable, try to flash it using flashtool or PC Companion"

so i tried that too but failed, flashtool is stuck at reading device info line

 

Also if i interrupt the process while S1 tool re-enumerates the USB so that phone is now detected as SOMC flash device and open Flashtool, it will see that the phone is connected in Flash mode
so taking advantage of that, if i try to flash any FTF the flash tool gets stuck on Reding Device information line.
only once it behaved differently, following is the log from Flashtool

25/054/2017 18:54:34 - INFO - <- This level is successfully initialized
25/054/2017 18:54:35 - INFO - Flashtool Version 0.9.23.1 built on 11-01-2017 15:12:00
25/054/2017 18:54:35 - INFO - Executing search strategies to find proxy selector
25/054/2017 18:54:35 - INFO - No proxy found for IE. Trying next one
25/054/2017 18:54:35 - INFO - No proxy found for firefox. Trying next one
25/054/2017 18:54:35 - INFO - No proxy found for java. Trying next one
25/054/2017 18:54:35 - INFO - Syncing devices from github
25/054/2017 18:54:35 - INFO - Opening devices repository.
25/054/2017 18:54:35 - INFO - Scanning devices folder for changes.
25/054/2017 18:54:40 - INFO - Pulling changes from github.
25/054/2017 18:54:41 - INFO - Quietly closing devices repository.
25/054/2017 18:54:41 - INFO - Devices sync finished.
25/054/2017 18:54:41 - INFO - Loading devices database
25/054/2017 18:54:41 - INFO - Loaded 94 devices
25/054/2017 18:54:41 - INFO - Starting phone detection
25/054/2017 18:54:46 - INFO - Device disconnected
25/058/2017 18:58:33 - INFO - Device connected in flash mode
25/058/2017 18:58:45 - INFO - Selected Bundle for Sony Xperia Z1(C6903). FW release : 14.6.A.1.236. Customization : DE
25/058/2017 18:58:45 - INFO - Preparing files for flashing
25/059/2017 18:59:10 - INFO - Please connect your device into flashmode.
25/059/2017 18:59:11 - INFO - Opening device for R/W
25/059/2017 18:59:11 - INFO - Reading device information
25/059/2017 18:59:11 - INFO - Phone ready for flashmode operations.
25/059/2017 18:59:11 - INFO - Opening TA partition 2
25/059/2017 18:59:11 - INFO - Current device : C6903 - BH90433806 - 1277-0154_R2D - 1274-8313_14.6.A.1.236 - EURO-LTE_14.6.A.1.236
25/059/2017 18:59:11 - INFO - Closing TA partition
25/059/2017 18:59:11 - INFO - Start Flashing
25/059/2017 18:59:11 - INFO - Processing loader.sin
25/059/2017 18:59:11 - INFO - Checking header
25/059/2017 18:59:11 - ERROR - Processing of loader.sin finished with errors.
25/059/2017 18:59:11 - INFO - Ending flash session
25/059/2017 18:59:11 - ERROR -
25/059/2017 18:59:11 - ERROR - Error flashing. Aborted
25/059/2017 18:59:11 - INFO - Device connected in flash mode
25/059/2017 18:59:12 - INFO - Device disconnected

i apologize for the really long post, and appreciate the patience of anybody who read it, i just wanted to mention everything to rule out all that i have already tried.

kindly guide me on what i might be doing wrong here.

any help is greatly appreciated

thanks in advance

 

PS: this is the current state of my phone,

If i press the power button, there is a short vibration and then nothing, blank display and no LEDs, i then have to force shutdown using PWR + Vol Up because nothing else works.
If i
Connect Charger >> Red LED, Remove charger >> Still Red LED until i force shutdown using PWR + Vol Up
Connect to PC >> Red LED, Remove from PC >> Still Red LED and same response as above (also can't see anything new connected in Device Manager too)

and if i Fire Up S1 tool of Sony FlashTool
PWR Up + Vol Up and connect to PC >> Red LED for a split Second and then Constant Blue LED!!!!!!! which i believe is the Fastboot Mode (my BL is locked, so falshing any images don't work, and Reboot to Bootloader command shows as successfully finished in ADB Window, but phone is still in the same condition that is constant Blue LED)
OR
Vol Down and connect to PC >> Red LED for a split Second and then Constant Green LED!!!!!!! (although S1tool or Sony Flashtool still wont recognize the device and Device Manager Shows Unknown Device )

and in both of the above cases, removing the USB cable doesn't turn off the Green/Blue LED, i have to force shutdown using PWR + Vol Up

Thanks

Edited by Qamar Yamin, 25 April 2017 - 15:51.

[Jurij]

LOADER AID: DEAD

This is hardware problem, loader aid is dead. Buy working phone with broken lcd and swap main board or just buy new phone and sell yours as a source of spare parts.

[Qamar Yamin]

LOADER AID: DEAD

This is hardware problem, loader aid is dead. Buy working phone with broken lcd and swap main board or just buy new phone and sell yours as a source of spare parts.

 

thank you for the response,

i will visit market today and see if i can find a board to replace with my phone

[mayure37]

Plz help me...

Xperia z1 C6902

 

HARDWARE ID 04000100E1207B00 NOT SUPPORTED

 

 

 

 

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 505CF601
HARDWARE ID 04000100E1207B00 NOT SUPPORTED
HARDWARE ID : 04000100E1207B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...
PROCEDURE STOPPED BY USER
Elapsed:10 secs.

 

 

[Jurij]

What is not clear for you?

HARDWARE ID 04000100E1207B00 NOT SUPPORTED

Buy working phone with broken lcd and swap main board then.

[ayadav12]

Hi there,

 

I have tried doing exactly the same as you have wriiten here. when I tried to flash the firmware using S1tool, I am getting an error "A device attached to the system is not functioning".

Could you please help me unbrick my Sony Xperia Z1 C6902???

 

 

7/26/2017 5:31:32 AM TO CONNECT NEXT PHONES
7/26/2017 5:31:32 AM X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
7/26/2017 5:31:32 AM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
7/26/2017 5:31:32 AM PRESS AND HOLD "BACK" BUTTON...
7/26/2017 5:31:32 AM  
7/26/2017 5:31:32 AM ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
7/26/2017 5:31:32 AM and Sony Xperia phone
7/26/2017 5:31:32 AM PRESS AND HOLD "Volume Down" BUTTON...
7/26/2017 5:31:32 AM  
7/26/2017 5:31:32 AM PLEASE ATTACH TURNED OFF PHONE NOW
7/26/2017 5:31:32 AM Waiting for phone ...
7/26/2017 5:31:47 AM llbug: [\\?\USB#VID_0FCE&PID_D19A#5&181f61e8&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "A device attached to the system is not functioning"
7/26/2017 5:31:47 AM Elapsed:15 secs.

 

This is what I am getting everytime. 

Edited by faflak, 28 July 2017 - 18:28.

[Jurij]

Remove battery, use good testpoint wire (metal paperclip for example, connect testpoint to gnd and attach usb cable. But as far as i remember C6902 is not supported by S1tool.

[spammer]

hello, can you tell me if this repairable or not? thanks you

 

 

Welcome S1 Tool [06.02.2015].

That is small and crippled subset of SETOOL2 service tool.

 

SELECT FIRMWARE PACKAGES

YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

CHECKING PACKAGES ...

 

DETACH USB CABLE FROM PHONE

REMOVE BATTERY FROM PHONE

ATTACH TESTPOINT

PRESS "READY", THEN ATTACH USB CABLE TO PHONE

 

will use Sahara protocol ... 

REMOVE TESTPOINT NOW, THEN PRESS "READY"

 

PROCESSING ...

SERIAL NUMBER : 01D55A03

HARDWARE ID : 04000100E1007B00

PRODUCT DETECTED: "MSM8974 OEM1 fused"

HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

Emergency loader uploaded ...

 

RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

LOADER AID: 0004

DEVICE ID: 035AD501

FLASH ID: "0015/01000001"

LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

 

WRITING PACKAGES ...

Processing package

G:\Users\Hatsune Miku\Desktop\C6903\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET

 

WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15

PARSING: "DEVELOPMENT"

value OTP_LOCK_STATUS_1 :  UNLOCKED, not match LOCKED

PARSING: "TEST_OEM0_007B00E1"

value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED

value OTP_DATA_1 :  00000100, not match 01000400

value IDCODE_1 : 007B00E1, match 007B00E1

PARSING: "PRECOMMERCIAL_007B00E1"

value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED

value OTP_DATA_1 : 01000400, match 01000400

value IDCODE_1 : 007B00E1, match 007B00E1

PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin

PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin

PROCESSING : s1sbl_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin

PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin

PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin

MINOR ERROR [ 0x801E003F_, err: 0017 ]

error while uploading final DATA block

Break.

FINISHED

Elapsed:39 secs.

 

[Jurij]

How did you damaged your phone? Make sure you are using proper firmware (for C6903 use C6903 firmware), try different firmware version.

[spammer]

How did you damaged your phone? Make sure you are using proper firmware (for C6903 use C6903 firmware), try different firmware version.

 

I just installed something, and after reboot, phone wasn't working (no Sony logo, no flash, no fastboot), and yes, Sony Xperia Z1 C6903 

 

Edit:

 

Also, i got a new motherboard, no box, no "info", i can turn on the phone but it has "patron lock", so i can't use it, how do i know what firmware it is? PC Companion isnt working for me

Edited by spammer, 18 August 2017 - 20:46.

[Jurij]

What did you installed?

[spammer]

Facebook (i actually reinstalled it, because, looks like it is bugged with xperia z1) I have 3 Xperia Z1, and all 3 have the same issue with Facebook apps, you can't use it, if you open it, you only see a blue screen constantly opening and closing, well... after reinstalling Facebook, phone freeze, and then it shutdown, no sony logo, no flash, no fastboot

[Jurij]

You can't kill your phone by running / installing / uninstalling facebook lol Try to flash it. If you can't enter flash mode, try to flash it in s1 emergency mode using testpoint. If situation will be still the same, i suppose it's hardware problem and only main board swap will help you. This is highly abnormal that you can't power / reset phone or connect it in flash mode. Did you tried hardware reset button?

[spammer]

I used the testpoint, i posted the log... and the error, if i push the power button it vibrates, but no image or anything else, i tried the hardware reset button in the sim port too

[Jurij]

And i've told you, try to use different firmware version. If you will get the same error - it's issue you can't fix using software and swap the main board then.

[spammer]

What do you mean with "different firmware version", i used the one you posted here, and i can see only one...

 

Also, i got a new motherboard, no box, no "info", i can turn on the phone but it has "patron lock", so i can't use it, how do i know what firmware it is? PC Companion isnt working for me