131 replies to this topic

[Jurij]

I can see that you've flashed only APPSW file. If you are sure that you've flashed all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL.

 

then try to flash it with different firmware version, for example the latest one.

[Mappipa]

14_2_a_0_290.fsp honami generic

how can i get this file?

along with this one?

[Jurij]

Once your boot is fixed during flash of APPSW file, you can flash your phone with any firmware version you want. Find any suitable firmware on the internet and flash it. In case of Xperia Z1 smartphone you must flash all 3 parts of firmware in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL.

[redhah]

YEEEEEEEESSSSSS, I DID IT....

My Z1 back to life.... Thanks to you Jurij.

I follow every step from the tutorial.

I have find the FSP and Elabel by myself by using a ftf file  from which i succeed to get the FSP and Elabel files following your tutorial ( http://sony.yt/topic...55-smartphones).

Everything was right but nothing happens....Green light but no boot.... I flashed it at least ten times during 2 days....

Always green light but no boot...

When i noticed that my Z1 board was not connected correctly(maybe i have disconnected it when i was deassembling my phone.

I connected it correctly and BADABOUM...... Z1 is booting and functionning...

I'm very happy..... Thanks to you.

[Jurij]

I'm glad that you've fixed your phone

[peppyscot]

Dear Jurij!

I need your help please.I got a z1.I tried to fix it(no signs of life), but with no luck.PC companion does'nt recognize the phone(Can't update firmware).Flashtool yes, I can made flashing but nothig happend.Phone can't boot up.If I connect to charger it charges, the precentage of charging show up until to reach 100%.I tried your method with testpoint.I can use flashmode of the phone but nothing else.I flashed it after connecting s1tool your APPSW file and after that with flashtool the whole firmware(FTF file), but still no signs of life.I have tried many firmware versions.What can I do?The PC companion recognises my wife's phone, so the driver isnt the problem.Help me please, thanks....

[Jurij]

If flashing done ok and phone can't power on - it's hardware problem, not releated to this thread at all. What happened that your phone become dead?

[vicman1890]

 

Hi friend, i get this log, no solution for the phone?

 

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : B1161503
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: DEAD
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:41 secs.

 

Thanks

[Jurij]

Loader aid dead - hardware problem. However you can try to insert battery before pressing ready after connecting testpoint but i doubt it will help. Buy working Z1 with broken lcd and swap main board.

[vicman1890]

Loader aid dead - hardware problem. However you can try to insert battery before pressing ready after connecting testpoint but i doubt it will help. Buy working Z1 with broken lcd and swap main board.

 

Oh well, my phone dead without flashing, thanks anyway.

[Lorand187]

I have made an restore via TWRP ( system, data, kernel , all of it ) and my phone just died. I somehow found out that i may have my TA messed up, and also , I fount about testpoint, i have researched many forums and stuff, and after hard searching i found this tutorial wich completely makes sense.>>>>

http://sony.yt/topic...z1-c6903/page-3<<<

everythings works just fine..my pc recongnises the phone ( i can hear the sound ), s1 tool also recognises the phone in emergency mode but still, when i flash the file it get me this log, and it seems like nothing really happens. 

 

 

 

DETACH USB CABLE FROM PHONE

REMOVE BATTERY FROM PHONE

ATTACH TESTPOINT

PRESS "READY", THEN ATTACH USB CABLE TO PHONE

 

will use Sahara protocol ... 

REMOVE TESTPOINT NOW, THEN PRESS "READY"

 

PROCESSING ...

SERIAL NUMBER : 4BD79907

HARDWARE ID : 04000100E1007B00

HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

Emergency loader uploaded ...

 

RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

LOADER AID: 0004

DEVICE ID: 0799D74B

FLASH ID: "0015/01000001"

LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

 

WRITING PACKAGES ...

Processing package

C:\Users\bvlor_000\Desktop\fw\amami_testpoint.SIN_FILE_SET

 

MINOR ERROR [ 0x80080021_, err: 0017 ]

error while uploading final HDR block

Break.

FINISHED

Elapsed:44 secs.

 

SELECT FIRMWARE PACKAGES

YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

CHECKING PACKAGES ...

 

DETACH USB CABLE FROM PHONE

REMOVE BATTERY FROM PHONE

ATTACH TESTPOINT

PRESS "READY", THEN ATTACH USB CABLE TO PHONE

 

will use Sahara protocol ... 

REMOVE TESTPOINT NOW, THEN PRESS "READY"

 

PROCESSING ...

SERIAL NUMBER : 4BD79907

HARDWARE ID : 04000100E1007B00

HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

Emergency loader uploaded ...

 

RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"

LOADER AID: 0004

DEVICE ID: 0799D74B

FLASH ID: "0015/01000001"

LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

 

WRITING PACKAGES ...

Processing package

C:\Users\bvlor_000\Desktop\fw\amami_testpoint.SIN_FILE_SET

 

MINOR ERROR [ 0x80080021_, err: 0017 ]

error while uploading final HDR block

Break.

FINISHED

Elapsed:37 secs.

 

 

 

first I tried with your z1 file and after I have downloaded a file for Z1 compact because as myself i'm using a z1 compact. but it was still the same result..everything worked fine until this point. I have to mention that i owned another Z1 compact and after trying to restore the SAME BACKUP with TWRP , the same thing happend, but i talked with sony and since i had warranty they paid my money back. and now with my 2nd phone this thing is happening again !!. i have to mention that i cannot flash anything, or use PC companion since i can't put my phone into fastboot or flashmode. if i connect the cable only the red led blinks. that s all the respone. until i made the testpoint thing. then i hear a sound of an connected device. please help, if u can. thanks alot  !

[Jurij]

What's inside that file: amami_testpoint.SIN_FILE_SET ?

[Lorand187]

What's inside that file: amami_testpoint.SIN_FILE_SET ?

I don;t know how to check. i do not have a program that could read what's inside of it

It was a file downloaded from xda . it was a thread about the same problem but for xZ1c. and with the file downloaded from here, even though it was for XPeria z1 , the s1 tool gave me the same error

any ideas ?

[Jurij]

Can you explain to me WHY do you flash unknown files into your phone and then crying that phone is dead? Never ever do that again. Check what is your phone model for example D5503 and flash proper firmware in S1 Emergency Mode in exact order:

 

1. APPSW,

 

2. FSP,

 

3. Elabel.

 

If you will be lucky, phone will be working again.

[Lorand187]

Can you explain to me WHY do you flash unknown files into your phone and then crying that phone is dead? Never ever do that again. Check what is your phone model for example D5503 and flash proper firmware in S1 Emergency Mode in exact order:

 

1. APPSW,

 

2. FSP,

 

3. Elabel.

 

If you will be lucky, phone will be working again.

You are perfectly right, but i tried to find soo hard these files and no luck. a link or smth may be very helpful. google doesn;t help me much. besides i trust xda, and i read all the comments and its was ok..as far as i saw. i tried to make and extraction with flashtool to make APPSW and FSP but as far as i know the s1 tool doesnt recognize zip or rar files. i will try searching something and see what i can do. 

i found your tutorial about how to trasform FTF file to .sin_file_set...i flashed the files in the exact orders and this is what i get. the same error as before for all the 3 flashed files.

 

 

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 4BD79907
HARDWARE ID : 04000100E1007B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0799D74B
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"


WRITING PACKAGES ...
Processing package
C:\Users\bvlor_000\Desktop\New folder\appsw.sin_file_set


Processing ACPU files
PROCESSING: apps_log.sin
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:92 secs.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 4BD79907
HARDWARE ID : 04000100E1007B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0799D74B
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"


WRITING PACKAGES ...
Processing package
C:\Users\bvlor_000\Desktop\New folder\fsp.sin_file_set


Processing ACPU files
PROCESSING: amss_fs_1.sin
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:29 secs.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 4BD79907
HARDWARE ID : 04000100E1007B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0799D74B
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"


WRITING PACKAGES ...
Processing package
C:\Users\bvlor_000\Desktop\New folder\ELABEL.sin_file_set


Processing ACPU files
PROCESSING: elabel-D5503-row_201402171009.1_14.5.A.0.242.sin
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:28 secs.
meanwhile i downloaded the latest s1 tool and now the log is like this. is kind of the same , without the last part...the error. 


Welcome S1 Tool [19.05.2015].
That is small and crippled subset of SETOOL2 service tool.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 4BD79907
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0799D74B
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"


WRITING PACKAGES ...
Processing package
C:\Users\bvlor_000\Desktop\New folder\appsw.sin_file_set


Processing ACPU files
PROCESSING: apps_log.sin
ERROR [ 0x80080021_, err: 0017 ]
HDR block not accepted
Break.
FINISHED
Elapsed:62 secs.


SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...


DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE


will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"


PROCESSING ...
SERIAL NUMBER : 4BD79907
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...


RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 0799D74B
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"


WRITING PACKAGES ...
Processing package
C:\Users\bvlor_000\Desktop\New folder\appsw.sin_file_set


Processing ACPU files
PROCESSING: apps_log.sin
ERROR [ 0x80080021_, err: 0017 ]
HDR block not accepted
Break.
FINISHED
Elapsed:30 secs.

[Jurij]

So the only thing you can do is to buy working D5503 with broken lcd and swap main board or sell your phone for replacement parts and but a new one

[jimmymobile]

pl help me solutions repair c6903.i repair show error.

Attached Files

•  c6903.jpg   120.06K   7 downloads

[Jurij]

Your phone has damaged trim area. Do you have original backup of trim area from your phone in working state?

[jimmymobile]

I received your phone in the phone status lost boot and do not have a data backup anything.

until I repair phone and show error.i don't have solutions next

[Jurij]

If you do not have trim area backup from working state - this phone is a brick. The only thing you can do - buy working phone with broken lcd and swap main board.