131 replies to this topic

[makabress]

i know , but only two point give semc flash driver , the other give usb pereferic only

[Jurij]

So try to flash your phone on both points. If that will not help, i have no other ideas.

[makabress]

hi again

s1tool give me this information

 

SERIAL NUMBER : BB23EB02

HARDWARE ID : 04000100E1007B00

PRODUCT DETECTED: "MSM8974 OEM1 fused"

HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177

Emergency loader uploaded ...

 

 

but reading the gold print in the mother board near the front camera , i can read 1272-1777 .2 1328. 4 PID

im not using the wrong .sin_file_set???

[Jurij]

You must use C6903 firmware if your phone is C6903.

[makabress]

i tel you in an other post that i can't identify this mother board , i recived it alone ( no case , or screen)

it look exactly like a c6903 but i have nothing to identify it ( c6902 or c6903 or c6906 or c6916 or c6943)

[Jurij]

Hardware id seems identical to C6903 so it must be C6903. If you know imei number you can check it too online...

[makabress]

I have only serial number , ok thank you

[pedroramos]

Hey, I got this log.

 

18/03/2015 18:25:17 DETACH USB CABLE FROM PHONE
18/03/2015 18:25:17 REMOVE BATTERY FROM PHONE
18/03/2015 18:25:17 ATTACH TESTPOINT
18/03/2015 18:25:17 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
18/03/2015 18:25:17  
18/03/2015 18:25:57 will use Sahara protocol ... 
18/03/2015 18:25:57 REMOVE TESTPOINT NOW, THEN PRESS "READY"
18/03/2015 18:25:57  
18/03/2015 18:26:05 PROCESSING ...
18/03/2015 18:26:05 SERIAL NUMBER : 1A398C02
18/03/2015 18:26:05 HARDWARE ID : 04000100E1007B00
18/03/2015 18:26:05 PRODUCT DETECTED: "MSM8974 OEM1 fused"
18/03/2015 18:26:05 HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
18/03/2015 18:26:05 Emergency loader uploaded ...
18/03/2015 18:26:07  
18/03/2015 18:26:07 RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
18/03/2015 18:26:07 LOADER AID: 0004
18/03/2015 18:26:07 DEVICE ID: 028C391A
18/03/2015 18:26:07 FLASH ID: "0011/01000010"
18/03/2015 18:26:07 LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
18/03/2015 18:26:07  
18/03/2015 18:26:07 WRITING PACKAGES ...
18/03/2015 18:26:07 Processing package
18/03/2015 18:26:07 D:\Desktop\tools\C6903\C6903\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
18/03/2015 18:26:07  
18/03/2015 18:26:08 WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
18/03/2015 18:26:08 PARSING: "DEVELOPMENT"
18/03/2015 18:26:08 value OTP_LOCK_STATUS_1 :  UNLOCKED, not match LOCKED
18/03/2015 18:26:08 PARSING: "TEST_OEM0_007B00E1"
18/03/2015 18:26:08 value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
18/03/2015 18:26:08 value OTP_DATA_1 :  00000100, not match 01000400
18/03/2015 18:26:08 value IDCODE_1 : 007B00E1, match 007B00E1
18/03/2015 18:26:08 PARSING: "PRECOMMERCIAL_007B00E1"
18/03/2015 18:26:08 value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
18/03/2015 18:26:08 value OTP_DATA_1 : 01000400, match 01000400
18/03/2015 18:26:08 value IDCODE_1 : 007B00E1, match 007B00E1
18/03/2015 18:26:08 PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin
18/03/2015 18:26:08 PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
18/03/2015 18:26:08 PROCESSING : s1sbl_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
18/03/2015 18:26:08 PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
18/03/2015 18:26:08 PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
18/03/2015 18:26:09 PROCESSING : Honami_S1BootConfig_MiscTA_130115_1430.ta
18/03/2015 18:26:09 Writing TA var 0002/084F/0049
18/03/2015 18:26:09 Writing TA var 0002/08FD/0001
18/03/2015 18:26:09 BOOT UPDATED
18/03/2015 18:26:09 Processing ACPU files
18/03/2015 18:26:09 PROCESSING: cache_S1-SW-LIVE-6732-PID1-0005-MMC.sin
18/03/2015 18:26:10 PROCESSING: apps_log_S1-SW-LIVE-6732-PID1-0005-MMC.sin
18/03/2015 18:26:10 PROCESSING: kernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
18/03/2015 18:26:13 PROCESSING: fotakernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
18/03/2015 18:26:15 SKIP: partition-image_S1-SW-LIVE-6732-PID1-0005-MBR.sin
18/03/2015 18:26:15 PROCESSING: rpm_S1-RPMFW-LIVE-6732-PID1-0005-MMC.sin
18/03/2015 18:26:15 no update files in package
18/03/2015 18:26:15 FINISHED
18/03/2015 18:26:15 Elapsed:61 secs.

Whats should I do now?

 

I tried to power it but no signs and no red led. Put it to charge and no red led.

[Jurij]

Now you must reflash your phone with all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL.

 

Or you can use PC Companion to update firmware in your phone or any other flash tool.

[pedroramos]

Now you must reflash your phone with all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL.

 

Or you can use PC Companion to update firmware in your phone or any other flash tool.

 

Could you help me with this?

I don't know how to do all these things. 

 

I can't get no screen image on my cellphone. When I plug it to charge the red led starts to blink and nothing happens.

 

When I connect it on the PC it seems that the usb is disconnecting all the time.

 

I'm with this useless phone for almost 1 year!!!

 

I put my contacts on my profile (facebook and cellphone for whats app messenger).

 

I would be very gratefull if you could help me and I would pay for the tips!

Edited by pedroramos, 19 March 2015 - 02:51.

[Jurij]

I've told you what to do. Boot in your phone is fixed so your phone should be detected in flash mode. All you need to do is to flash all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

using s1tool or all firmware in one .ftf file using flashtool: http://sony.yt/topic...oid-smartphone/ Just download firmware from internet, flash it and your phone will be alive

[pedroramos]

I've told you what to do. Boot in your phone is fixed so your phone should be detected in flash mode. All you need to do is to flash all firmware parts in order:

 

1. APPSW,

 

2. FSP,

 

3. ELABEL

 

using s1tool or all firmware in one .ftf file using flashtool: http://sony.yt/topic...oid-smartphone/ Just download firmware from internet, flash it and your phone will be alive

 

I've already tried the flashtool with no success!

 

I have a .290 version FTF file but as I said the phone lost connection and reconnects itself as if I were unplugging the USB cable or something.

 

The phone is plugged to charge and the red light is blinking, nothing happen!

The same way that it was before to use the s1tool.

 

How can I flash these 3 files using the s1tool? and where I get them?

Edited by pedroramos, 19 March 2015 - 03:31.

[Jurij]

Here is tutorial how to convert .ftf file to .sin_file_set (or .zip) files: http://sony.yt/topic...55-smartphones/

 

 

1. Step one - unpack .ftf file using winrar to new folder.

 

2. Step 2: create appsw.zip (not rar) file, which should contain:

 

• rpm.sin,
• partition-image.sin,
• kernel.sin,
• fotakernel.sin,
• cache.sin,
• apps_log.sin

3. Step 3: create fsp.zip:

 

• userdata.sin,
• system.sin,
• amms-fsg,
• amms-fs1,
• amms-fs2

4. Create ELABEL.zip:

 

• elabel.sin

5. Flash it as it's described in this tutorial

[pedroramos]

I tried to flash the FTF with s1tool, emergency mode and via testpoint, got this error:

 

19/03/2015 01:30:14 Welcome S1 Tool [06.02.2015].
19/03/2015 01:30:14 That is small and crippled subset of SETOOL2 service tool.
19/03/2015 01:30:23
19/03/2015 01:30:23 SELECT FIRMWARE PACKAGES
19/03/2015 01:30:23 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
19/03/2015 01:30:31 CHECKING PACKAGES ...
19/03/2015 01:30:31
19/03/2015 01:30:32 DETACH USB CABLE FROM PHONE
19/03/2015 01:30:32 REMOVE BATTERY FROM PHONE
19/03/2015 01:30:32 ATTACH TESTPOINT
19/03/2015 01:30:32 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
19/03/2015 01:30:32
19/03/2015 01:30:57 will use Sahara protocol ...
19/03/2015 01:30:57 REMOVE TESTPOINT NOW, THEN PRESS "READY"
19/03/2015 01:30:57
19/03/2015 01:31:02 PROCESSING ...
19/03/2015 01:31:02 SERIAL NUMBER : 1A398C02
19/03/2015 01:31:02 HARDWARE ID : 04000100E1007B00
19/03/2015 01:31:02 PRODUCT DETECTED: "MSM8974 OEM1 fused"
19/03/2015 01:31:02 HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
19/03/2015 01:31:02 Emergency loader uploaded ...
19/03/2015 01:31:03
19/03/2015 01:31:03 RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
19/03/2015 01:31:03 LOADER AID: 0004
19/03/2015 01:31:03 DEVICE ID: 028C391A
19/03/2015 01:31:03 FLASH ID: "0011/01000010"
19/03/2015 01:31:03 LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
19/03/2015 01:31:04
19/03/2015 01:31:04 WRITING PACKAGES ...
19/03/2015 01:31:04 Processing package
19/03/2015 01:31:04 D:\Desktop\C6903_14.2.A.0.290_Global LTE.ftf
19/03/2015 01:31:04
19/03/2015 01:31:04 Processing ACPU files
19/03/2015 01:31:04 PROCESSING: loader.sin
19/03/2015 01:31:04 MINOR ERROR [ 0x8009001F_, err: 0017 ]
19/03/2015 01:31:04 error while uploading final HDR block
19/03/2015 01:31:04 Break.
19/03/2015 01:31:04 FINISHED
19/03/2015 01:31:04 Elapsed:41 secs.

Edited by Jurij, 19 March 2015 - 05:36.

[Jurij]

  Read that post: http://sony.yt/topic...ge-2#entry44005, convert .ftt to .zip (.sin_file_set) files then flash your phone

[arcangel]

hi, i try to recover the boot of my xperia z1 c6903 but im getting this error.

 

Welcome S1 Tool [06.02.2015].
That is small and crippled subset of SETOOL2 service tool.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : 42B93D03
HARDWARE ID : 04000100E1007B00
PRODUCT DETECTED: "MSM8974 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...
RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 033DB942
FLASH ID: "0011/01000010"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
WRITING PACKAGES ...
Processing package
D:\micko\mobile\s1tool\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
MINOR ERROR [ 0x80080021_, err: 0017 ]
error while uploading final HDR block
Break.
FINISHED
Elapsed:49 secs.

[Jurij]

It's hardware problem, you can't fix that with any software. Buy working Xperia Z1 with broken LCD and swap main board.

[hieudnt]

Hi, i have a brick C6903, I flashed APPSW. FSP and ELABEL from C6903_14.4.A.0.157_Customized_SG.ftf file, then it reported:
...
...

SERIAL NUMBER : E84A9502
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: DEAD
DEVICE ID: 02954AE8
FLASH ID: "0011/01000000"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
 
WRITING PACKAGES ...
Processing package
D:\New folder\elabel.sin_file_set
 
Processing ACPU files
PROCESSING: elabel-C6903-row_201401221511.1_14.4.A.0.157.sin
no update files in package
FINISHED
Elapsed:46 secs.

 
I can't get no screen image on my cellphone. When I plug it to charge the red led starts to blink and nothing happens.
 
My phone cannot detect in flashmode.
What should i do?

[Jurij]

How this phone became bricked? Can you post full flashing logs?

LOADER AID: DEAD

That may suggest that you should search for Xperia Z1 with broken lcd for main board swap...

[hieudnt]

hi,when i downgrade myphone from kikat 4.4.4 to 4.2.2 then it bricked.

i tried to flash by older s1tool it said that hardware id not support

So i flash by s1tool 06.02.2015, and in s1 emergency mode:

Welcome S1 Tool [06.02.2015].
That is small and crippled subset of SETOOL2 service tool.

SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : E84A9502
HARDWARE ID : 00000000E1007B00
PRODUCT DETECTED: "MSM8974 Unfused"
HASH :CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Emergency loader uploaded ...

RUNNING S1_PRELOADER VER "MSM8974_23_4"
LOADER AID: DEAD
DEVICE ID: 02954AE8
FLASH ID: "0011/01000000"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"

WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Downloads\C6903\C6903\14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET

WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 : UNLOCKED, match UNLOCKED
PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_1_S1-SDI2-TEST-B316-PID1-0001-SDI_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID09_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : S1_SBL_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID65_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID00_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_1_MSM8974-TEST-HWID007B00E1-0001-SWID07_S1-BOOT-TEST-B316-0001-MMC.sin
PROCESSING : Honami_S1BootConfig_MiscTA_130115_1430.ta
Writing TA var 0002/084F/0049
Writing TA var 0002/08FD/0001
BOOT UPDATED
Processing ACPU files
PROCESSING: cache_S1-SW-LIVE-6732-PID1-0005-MMC.sin
PROCESSING: apps_log_S1-SW-LIVE-6732-PID1-0005-MMC.sin
PROCESSING: kernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
PROCESSING: fotakernel_S1-SW-LIVE-6732-PID1-0005-MMC.sin
SKIP: partition-image_S1-SW-LIVE-6732-PID1-0005-MBR.sin
PROCESSING: rpm_S1-RPMFW-LIVE-6732-PID1-0005-MMC.sin
no update files in package
FINISHED
Elapsed:55 secs.

 After that it still cannot detect in flashmode by any flashtools.  

then i tried flash APPSW. FSP and ELABEL but nothing happens