Sony.yt - International Sony Forum

Hello, i have problem with my Xperia T LT30p. I try flash original FW with S1tool version:   s1tool 19V2015.exe . My device is hard bricked. No LED signalization, display is blank, but but the device will connect PC and i try flash my device. I try install cm-14 for my device, but after flashing have problem with my phone. This is my result from s1tool, if i don´t check skip TA open (in attachments with checked).

13.12.2016 0:48:52 Welcome S1 Tool [19.05.2015].

13.12.2016 0:48:52 That is small and crippled subset of SETOOL2 service tool.

13.12.2016 0:48:58  

13.12.2016 0:48:58 SELECT FIRMWARE PACKAGES

13.12.2016 0:48:58 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON

13.12.2016 0:49:03 CHECKING PACKAGES ...

13.12.2016 0:49:03  

13.12.2016 0:49:03 DETACH USB CABLE FROM PHONE

13.12.2016 0:49:03 REMOVE BATTERY FROM PHONE

13.12.2016 0:49:03 ATTACH TESTPOINT

13.12.2016 0:49:03 PRESS "READY", THEN ATTACH USB CABLE TO PHONE

13.12.2016 0:49:03  

13.12.2016 0:49:10 will use DLOAD protocol ... 

13.12.2016 0:49:10 0808010600900000

13.12.2016 0:49:10 0D0F50424C5F446C6F6164564552322E30

13.12.2016 0:49:10 162001000100

13.12.2016 0:49:10 17004001000100E1107900

13.12.2016 0:49:10 PRODUCT DETECTED: "MSM82060A-1 OEM1 Fused"

13.12.2016 0:49:10 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1

13.12.2016 0:49:10 PROCESSING ...

13.12.2016 0:49:12 REMOVE TESTPOINT NOW, THEN PRESS "READY"

13.12.2016 0:49:12  

13.12.2016 0:49:14 Emergency loader uploaded ...

13.12.2016 0:49:14  

13.12.2016 0:49:14 RUNNING S1_PRELOADER VER "R5F001"

13.12.2016 0:49:14 LOADER AID: 0001

13.12.2016 0:49:15 [ llcomm: 00010000,00080000 ]

13.12.2016 0:49:15 DEVICE ID: 1AA33D02

13.12.2016 0:49:15 FLASH ID: "0045/00000090"

13.12.2016 0:49:15 LOADER VERSION: "R5F001"

13.12.2016 0:49:15  

13.12.2016 0:49:15 WRITING PACKAGES ...

13.12.2016 0:49:15 Elapsed:16 secs.

 

Do not use .ftf files, unpack .sin files from .ftf and create appsw + fsp .sin_file_set files. Here is tutorial how to: http://sony.yt/topic...55-smartphones/  .

I try, but your files is not the same in my directory. I don´t know, which one files must select for APPSW & FSP

In appsw add:

• apps_log
• cache
• fotakernel
• kernel
• partition-image
• update.xml

Other files - it's FSP.

update.xml? where i can find this file?

It's here:

  <?xml version="1.0" encoding="utf-8" ?> 
- <UPDATE>
  <NOERASE>apps_log_S1-SW-LIVE-7054-PID1-0002-S1-PARTITION.sin</NOERASE> 
  <SYSTEMPARTITIONIMAGE>partition-image_S1-SW-LIVE-7054-PID1-0002-MBR.sin</SYSTEMPARTITIONIMAGE> 
  </UPDATE>

but you can skip it or create your own update.xml file

okk i try with Sin_file_set, but still have big problem

14.12.2016 8:39:36 Welcome S1 Tool [19.05.2015].
14.12.2016 8:39:36 That is small and crippled subset of SETOOL2 service tool.
14.12.2016 8:39:41  
14.12.2016 8:39:41 SELECT FIRMWARE PACKAGES
14.12.2016 8:39:41 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
14.12.2016 8:39:44 CHECKING PACKAGES ...
14.12.2016 8:39:44  
14.12.2016 8:39:44 DETACH USB CABLE FROM PHONE
14.12.2016 8:39:44 REMOVE BATTERY FROM PHONE
14.12.2016 8:39:44 ATTACH TESTPOINT
14.12.2016 8:39:44 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
14.12.2016 8:39:44  
14.12.2016 8:39:50 will use DLOAD protocol ... 
14.12.2016 8:39:50 0808010600900000
14.12.2016 8:39:50 0D0F50424C5F446C6F6164564552322E30
14.12.2016 8:39:50 162001000100
14.12.2016 8:39:50 17004001000100E1107900
14.12.2016 8:39:50 PRODUCT DETECTED: "MSM82060A-1 OEM1 Fused"
14.12.2016 8:39:50 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
14.12.2016 8:39:50 PROCESSING ...
14.12.2016 8:39:51 REMOVE TESTPOINT NOW, THEN PRESS "READY"
14.12.2016 8:39:51  
14.12.2016 8:39:53 Emergency loader uploaded ...
14.12.2016 8:39:53  
14.12.2016 8:39:53 RUNNING S1_PRELOADER VER "R5F001"
14.12.2016 8:39:53 LOADER AID: 0001
14.12.2016 8:39:53 [ llcomm: 00010000,00080000 ]
14.12.2016 8:39:53 DEVICE ID: 1AA33D02
14.12.2016 8:39:53 FLASH ID: "0045/00000090"
14.12.2016 8:39:53 LOADER VERSION: "R5F001"
14.12.2016 8:39:54  
14.12.2016 8:39:54 WRITING PACKAGES ...
14.12.2016 8:39:54 Processing package
14.12.2016 8:39:54 C:\Users\NeXior\Downloads\S1 tool\fw\APPSW.sin_file_set
14.12.2016 8:39:54  
14.12.2016 8:39:54 ERROR [ 0x0506:_sin_header_verification, err: 000A ]
14.12.2016 8:39:54 HDR block not accepted
14.12.2016 8:39:54 Break.
14.12.2016 8:39:54 ERROR [ S1_TA_Close,limited, err: 0010 ]
14.12.2016 8:39:54 FINISHED
14.12.2016 8:39:54 Elapsed:12 secs.

i don´t know, how to flash without any errors

Please Login or Register to see this Hidden Content

Do you know how to do for s1tool detect the phone? i have a Xperia T LT30p. Thanks before.

In flash mode turn off phone, hold vol- and attach usb cable. In EDL mode remove battery, connect testpoint to gnd and attach usb cable

Hello
My phone is xperia t
  Hard Bricked is
I have this problem with software s1tool:
  Please help me


 PROCEDURE STOPPED BY USER
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1107900
PRODUCT DETECTED: "MSM82060A-1    OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5F001"
LOADER AID: 0001
[ llcomm: 00010000,00080000 ]
DEVICE ID: 92CEEE08
FLASH ID: "0015/00000000"
LOADER VERSION: "R5F001"
 
WRITING PACKAGES ...
Processing package
C:\Users\maxx\Desktop\New folder (5)\9_2_A_0_295.FSP_Mint_GLOBAL_HSPA_1265_1620_S1_SW_LIVE_7054_PID1_0002.R1J_2.SIN_FILE_SET
 
Processing ACPU files
PROCESSING: userdata_S1-SW-LIVE-7054-PID1-0002-S1-PARTITION.sin
ERROR [ 0x0506:_sin_header_verification, err: 000A ]
HDR block not accepted
Break.
ERROR [ S1_TA_Close,limited, err: 0010 ]
FINISHED
Elapsed:17 secs.

Firstly you must flash APPSW, then FSP.

Firstly you must flash APPSW, then FSP.

Ftf is a problem in converting files
When I turned to sin_file_set
s1tool package does not detect!

So make your life easier, download firmware with .sin_file_set extension from our forum download and flash it using s1tool

So make your life easier, download firmware with .sin_file_set extension from our forum download and flash it using s1tool

I downloaded the operating system with the extension sin_file_set forum
But getting this message:

 

Processing ACPU files
PROCESSING: userdata_S1-SW-LIVE-7054-PID1-0002-S1-PARTITION.sin
ERROR [0x0506: _sin_header_verification, err: 000A]
HDR block not accepted
Break.
ERROR [S1_TA_Close, limited, err: 0010]
FINISHED
Elapsed: 17 secs.

You are flashing fsp file. I've told you to flash appsw file first.