←  Xperia ZL2 | Z2a

Sony.yt - International Sony Forum

»

Please help my XPERIA Z2a D6563 looks like...

PuXiongfei - zdjęcie PuXiongfei 01 kwi 2016

First,sorry for my poor english.
I am from china and I got a XPERIA Z2a D6563,it can't startup or charge.the red led on receiver lightup/blinking when i plugged in wall charger or connect to computer,and about 20min later,the led off.I tried plugged the phone in wall charger all night(>8 hours) and the phone have no response.

 

the phone state looks like how to unbrick tutorial topic said:
 

 

 

  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.

 

:(  :( please give me some suggestion and help..thank you..

Odpowiedz

Jurij - zdjęcie Jurij 02 kwi 2016

What happened to your phone? What you did? Any marks of water damaged? Phone has fallen? You made some software modifications?

Odpowiedz

PuXiongfei - zdjęcie PuXiongfei 02 kwi 2016

thank for you reply.

no water damaged,no fallen,I charge the phone as usual in night,when i woke up,the phone is no response and no charge led.I have no idea what happend.

Odpowiedz

Jurij - zdjęcie Jurij 04 kwi 2016

Try hardware reset button. If that will not help, hold if for 120 seconds or longer and post results.

Odpowiedz

PuXiongfei - zdjęcie PuXiongfei 04 kwi 2016

thank for you reply.

 

I tried hold power button and volume up together over 5 min,no response.

power button,volume up and volume down together over 5 min,no response.

the phone only light up red led when i connect to wall charger or computer.but nothing can be found in windows device manager. :(  :(

Odpowiedz

PuXiongfei - zdjęcie PuXiongfei 07 kwi 2016

I send my phone to Xperia Care.waiting for good news. :(

Odpowiedz

Jurij - zdjęcie Jurij 08 kwi 2016

If your phone is on warranty, they should send you a new phone or swap main board in this one :)

Odpowiedz