OFFLINE
Freshly registered FAQ reader
Posted 15 December 2016 - 09:39
Hello,
I have a problem with my Z3 D6603. After replacing the lcd, the vibration does not work anymore. I've replaced the flex containing vibrator with a new one, but id does not work this new too, so the problem is not of the vibrator but on the motherboard itself. Anyone have some schematic to search fot the vibrator source?
Thanks
Edika
Edited by edika, 15 December 2016 - 09:41.
OFFLINE
Emperror of Sony Kingdom
Posted 17 December 2016 - 01:09
Service manual: http://sony.yt/topic...kcja-serwisowa/
PDF: Troubleshooting guide - page 22:
1.9.1 Vibrator not generating alerts
Check:
Inspect the BtB connector of Sub PBA-B.
Action:
1. If not properly connected ? disconnect and reconnect it.
2. If dirty or oxidized ? clean it.3. If the Relay FPC is damaged ? replace it.
4. Replace Sub PBA-B
