Jump to content


Photo

[English] Tutorial how to unbrick and update boot in Sony Xperia V LT25

Sony Xperia V LT25 Boot Repair Firmware Flash S1tool

  • Please log in to reply
101 replies to this topic

#1 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 15 March 2015 - 05:59

Hello,

Today i will show you how to unbrick your Sony Xperia V LT25 and update boot. Sony Xperia V LT25 smartphone can be bricked because of damaged boot.

If your phone is dead and you have warranty - send your phone to Sony - you will get new phone.

If your phone is dead and you do not have warranty, this tutorial is for you. Remember, during this process you can damage your phone, everything you are doing on your own risk.

Bricked phone symptoms:

  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.

Repair steps:

1. Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:




qhusb_dload device

you are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone using this service manual: http://sony.yt/topic...kcja-serwisowa/, remove battery and connect your phone using testpoint.

2. Download and install the latest Gordon's Gate Flash Driver from this post: Attached File  ggsetup-3.0.0.7.exe   3.58MB   14083 downloads

3. Download and run this s1tool: Attached File  s1tool 28II2015.exe   3.13MB   4779 downloads

4. Download boot firmware for your Sony Xperia V LT25 (extract it from rar): Attached File  R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.rar   317.19K   1133 downloads

5. In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia V LT25 boot firmware .sin_file_set file,

6. Press Testpoint READY button:
 

 

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, connect testpoint to GND and attach USB cable:

 

lt25_testpoint.jpg


7. When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

8. After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader and flash selected boot firmware.

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1507E00
PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5G008"
LOADER AID: 0001
DEVICE ID: 2078EB03
FLASH ID: "00FE/004E003F"
LOADER VERSION: "R5G008"
 
WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Desktop\S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET
 
Processing ACPU files
PROCESSING: boot.sin
no update files in package
FINISHED
Elapsed:29 secs.

9. Flash your phone fully with Sony Update Service, Sony PC Companion or any other flasher like current Flashtool version or this S1tool (S1 FLASH MODE) using all firmware parts (APPSW, FSP).

10. Time to reassembly your phone using service manual: http://sony.yt/topic...kcja-serwisowa/

Now your phone should be fixed :slonko:


Credits: Big thanks to mr the_laser for creating this fantastic software and solution :piwo:

Best regards,

Jurij
 

Tutorial worked out for Sony.yt forum - copying is prohibited.


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#2 OFFLINE   soshan

soshan

    Freshly registered FAQ reader

  • User
  • 2 posts
    • Time Online: 1h 43m

Posted 03 April 2015 - 16:26

hi how can i solve this erorr:

 

 

Welcome S1 Tool [28.02.2015].
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
CAN NOT OPEN PACKAGE
Elapsed:6 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
CAN NOT OPEN PACKAGE
Elapsed:1 secs.
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1506B00
PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
PROCEDURE STOPPED BY USER
Elapsed:415 secs.
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1506B00
PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5F001"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:66 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
CAN NOT OPEN PACKAGE
Elapsed:7 secs.
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1506B00
PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5F001"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:67 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
CAN NOT OPEN PACKAGE
Elapsed:2 secs.
 


  • 0

#3 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 03 April 2015 - 17:34

Hmm, try to connect battery when S1Tool ask you to remove testpoint and change usb port.


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#4 OFFLINE   soshan

soshan

    Freshly registered FAQ reader

  • User
  • 2 posts
    • Time Online: 1h 43m

Posted 04 April 2015 - 15:09

i chengh usb cable and port but show same erorr:

 

 

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
Elapsed:12 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
CAN NOT OPEN PACKAGE
Elapsed:1 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
PROCEDURE STOPPED BY USER
Elapsed:12 secs.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1506B00
PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5F001"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:91 secs.
 

 may be damage emmc?


  • 0

#5 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 04 April 2015 - 15:59

Maybe... Loader is not responding, that is not normal situation... If this s1tool can't help you, i'm affraid main board swap is the only solution to fix your phone.


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#6 OFFLINE   zonner

zonner

    Freshly registered FAQ reader

  • User
  • 2 posts
    • Time Online: 2h 36m

Posted 22 September 2015 - 09:00

qload detect as zeus flash and in s1

phone not supported in this mode (s1 emergency mode )

help please

updte : try diffreen driver detected as qualcom hs-usb qloader9008

after ready on s1 nothing happen always on waiting phone


Edited by zonner, 22 September 2015 - 09:35.

  • 0

#7 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 22 September 2015 - 14:06

Please use current S1tool version: Attached File  s1tool 28II2015.exe   3.13MB   4779 downloads also uninstall all flash drivers and install this one: Attached File  ggsetup-3.0.0.7.exe   3.58MB   14083 downloads :)


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#8 OFFLINE   zonner

zonner

    Freshly registered FAQ reader

  • User
  • 2 posts
    • Time Online: 2h 36m

Posted 22 September 2015 - 15:34

Please use current S1tool version: also uninstall all flash drivers and install this one: :)

qload detect as zeus flash or qualcom hs-usb qloader9008

witch one ??

sorry for bad english


  • 0

#9 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 22 September 2015 - 15:50

Please read this tutorial and follow it step by step. Disconnect battery, perform testpoin procedure in S1 Emergency mode. Also... do you know how that phone was damaged?


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#10 OFFLINE   Be6i4

Be6i4

    Freshly registered FAQ reader

  • User
  • 4 posts
    • Time Online: 2h 57m

Posted 16 October 2015 - 11:23

Hi,

 

Thanks for the great tutorial!!!

I tried several times but getting this error message:

Processing ACPU files

PROCESSING: R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.SIN

FATAL ERROR [ 0x0508:_sin_header_verification, err: 000A ]

error while uploading final HDR block

Break.

FATAL ERROR [ limited, err: 0010 ]

FINISHED Elapsed:20 secs



Any advice?

 

Thanks!


  • 0

#11 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 16 October 2015 - 12:06

Try the lastest S1tool version: Attached File  s1tool 28II2015.exe   3.13MB   4779 downloads - if that will not help, it's hardware problem probably. I don't know how your phone become a brick, so it's hard to help you more.


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#12 OFFLINE   Be6i4

Be6i4

    Freshly registered FAQ reader

  • User
  • 4 posts
    • Time Online: 2h 57m

Posted 16 October 2015 - 12:09

Thanks for the quick reply. I'm using this version. The guy that left me the phone - didn't tell what caused the brick. I already asked him, but probably you're right. is there another file called  R11AB029.S1_MSM8960_R3_S1Boot_1264_2289_Live_HWID6B50E1.SOFTWARE.SIN_FILE_SET that I can try?


  • 0

#13 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 16 October 2015 - 12:18

No. You must use correct boot. Are you sure it's LT25i Xperia V?


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#14 OFFLINE   Be6i4

Be6i4

    Freshly registered FAQ reader

  • User
  • 4 posts
    • Time Online: 2h 57m

Posted 16 October 2015 - 12:45

That's correct. I have phone's box and even under battery It's written LT25I/Xperia V. I'll wait for this guy to confirm what has caused the brick and will share with you. 

Thanks!


  • 0

#15 OFFLINE   Be6i4

Be6i4

    Freshly registered FAQ reader

  • User
  • 4 posts
    • Time Online: 2h 57m

Posted 19 October 2015 - 08:34

The phone has corrupted TA partition. (that's what I was told) 

I guess that's why I can't restore it with s1tool.


  • 0

#16 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 19 October 2015 - 11:27

So it's a brick. Buy working Xperia V with broken lcd and swap main board, there is nothing more you can do...


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#17 OFFLINE   Sonyyt767

Sonyyt767

    Freshly registered FAQ reader

  • User
  • 1 posts
    • Time Online: 17m

Posted 24 November 2015 - 19:50

Is there a tutorial for Xperia T? My phone is bricked at the moment 


  • 0

#18 OFFLINE   Jurij

Jurij

    Emperror of Sony Kingdom

  • Administrator
  • 12,111 posts
    • Time Online: 564d 19h 15m

Posted 24 November 2015 - 23:09

Bricked how? Use current S1tool and try to flash your phone in S1 Emergency mode.


  • 0
Serwis Sony Ericsson Online | Online Sony Ericsson Service | ?????? Sony Ericsson O?????

Xperia.jpg

Więcej informacji, Cennik | More information, Price list GG: 1793684 Skype: gen.jurij

Other services: LG, HTC, Samsung, Alcatel, Blackberry, Huawei, ZTE, Motorola, Sharp unlock and more...

#19 OFFLINE   leslie05

leslie05

    Freshly registered FAQ reader

  • User
  • 5 posts
    • Time Online: 6h 35m

Posted 30 November 2015 - 16:18

Hello,

Today i will show you how to unbrick your Sony Xperia V LT25 and update boot. Sony Xperia V LT25 smartphone can be bricked because of damaged boot.

If your phone is dead and you have warranty - send your phone to Sony - you will get new phone.

If your phone is dead and you do not have warranty, this tutorial is for you. Remember, during this process you can damage your phone, everything you are doing on your own risk.

Bricked phone symptoms:

  • can't power on after flash,
  • no lcd or led reaction for power button,
  • no lcd or led reaction for charger,
  • no lcd or led reaction if phone is connected to PC,
  • your PC can't detect your phone with vol-,
  • phone does not vibrate when holding vol+ and power together.

Repair steps:

1. Firstly connect turned off bricked phone to your PC. If phone will be detected in device manager as:




qhusb_dload device

you are lucky and this is the end of the first step for you. Just disconnect phone.

If your phone can't be detected at all, you must find testpoint. Disassemble your phone using this service manual: http://sony.yt/topic...kcja-serwisowa/, remove battery and connect your phone using testpoint.

2. Download and install the latest Gordon's Gate Flash Driver from this post:

3. Download and run this s1tool:

4. Download boot firmware for your Sony Xperia V LT25 (extract it from rar):

5. In S1tool choose S1 EMERGENCY mode, press Flash button, select Sony Xperia V LT25 boot firmware .sin_file_set file,

6. Press Testpoint READY button:
 

 

and if your phone is detected as qhusb_dload device, just attach usb cable. If not, connect testpoint to GND and attach USB cable:

 

 

 

 

7. When drivers will be installed and phone will be detected, program will ask you to disconnect testpoint. Disconnect testpoint from GND and press Testpoint READY button.

8. After that phone will load emergency s1 loader, re-enumerate usb, load s1 loader and flash selected boot firmware.

Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1507E00
PRODUCT DETECTED: "SONY MSM8960-3 Pro OEM1 Fused"
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "R5G008"
LOADER AID: 0001
DEVICE ID: 2078EB03
FLASH ID: "00FE/004E003F"
LOADER VERSION: "R5G008"
 
WRITING PACKAGES ...
Processing package
C:\Users\Administrator\Desktop\S1Boot_R11B023_HWID7E50E1.SIN_FILE_SET
 
Processing ACPU files
PROCESSING: boot.sin
no update files in package
FINISHED
Elapsed:29 secs.

9. Flash your phone fully with Sony Update Service, Sony PC Companion or any other flasher like current Flashtool version or this S1tool (S1 FLASH MODE) using all firmware parts (APPSW, FSP).

10. Time to reassembly your phone using service manual: http://sony.yt/topic...kcja-serwisowa/

Now your phone should be fixed :slonko:


Credits: Big thanks to mr the_laser for creating this fantastic software and solution :piwo:

Best regards,

Jurij
 

Tutorial worked out for Sony.yt forum - copying is prohibited.

Hallo Jurij,

 

I got all the symptoms for a bricked phone on my device.

So in the end I found your solution here and tried it.

 

The problem is that it works up to the point "Writing packages..."

But there are no packages written.

Next step is "Elapsed:35 secs."

 

That's all.

 

Log file says:

30.11.2015 15:47:36 Welcome S1 Tool [28.02.2015].
30.11.2015 15:47:36 That is small and crippled subset of SETOOL2 service tool.
30.11.2015 15:47:40  
30.11.2015 15:47:40 SELECT FIRMWARE PACKAGES
30.11.2015 15:47:41 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
30.11.2015 15:47:45 CHECKING PACKAGES ...
30.11.2015 15:47:45  
30.11.2015 15:47:45 DETACH USB CABLE FROM PHONE
30.11.2015 15:47:45 REMOVE BATTERY FROM PHONE
30.11.2015 15:47:45 ATTACH TESTPOINT
30.11.2015 15:47:45 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
30.11.2015 15:47:45  
30.11.2015 15:48:05 will use DLOAD protocol ...
30.11.2015 15:48:05 0808010600900000
30.11.2015 15:48:05 0D0F50424C5F446C6F6164564552322E30
30.11.2015 15:48:05 162001000100
30.11.2015 15:48:05 17004001000100E1506B00
30.11.2015 15:48:05 PRODUCT DETECTED: "SONY MSM8960-3       OEM1 Fused"
30.11.2015 15:48:05 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
30.11.2015 15:48:05 PROCESSING ...
30.11.2015 15:48:09 REMOVE TESTPOINT NOW, THEN PRESS "READY"
30.11.2015 15:48:09  
30.11.2015 15:48:13 Emergency loader uploaded ...
30.11.2015 15:48:13  
30.11.2015 15:48:13 RUNNING S1_PRELOADER VER "R5F001"
30.11.2015 15:48:13 LOADER AID: 0001
30.11.2015 15:48:16 DEVICE ID: 6D090E09
30.11.2015 15:48:16 FLASH ID: "0015/00000000"
30.11.2015 15:48:16 LOADER VERSION: "R5F001"
30.11.2015 15:48:16  
30.11.2015 15:48:16 WRITING PACKAGES ...
30.11.2015 15:48:16 Elapsed:35 secs.

I would appreciate any hint that helps further on.

 

Sorry for my english is not so good :(

 

 

Thank you.

 

leslie05


Edited by faflak, 30 November 2015 - 16:58.

  • 0

#20 OFFLINE   faflak

faflak

    Moderator

  • Moderator
  • 1,031 posts
    • Time Online: 81d 22h 13m

Posted 30 November 2015 - 17:08

@leslie05 i dont see files boot firmware


  • 0



Also tagged with one or more of these keywords: Sony Xperia V, LT25, Boot, Repair, Firmware, Flash, S1tool

1 user(s) are reading this topic